Texture development and properties of Ti-IF steels produced by different hot-rolling processes

摘要

Texture is a pivotal factor for the deep drawability of interstitial free steel (IF steel). The evolution of microstructure and recrystallization texture of Ti-IF steel through the processing of hot rolling, cold rolling and annealing have been studied. The mechanical properties including strain hardening index n and plastic strain ratio r are also measured. For comparison, ferrite rolling and austenite rolling are both studied. The results show that the intensity of γ-fiber after ferrite rolling is higher than that after austenite rolling. The great balance between the {111}〈110〉 and {111}〈112〉 leads to low △r value after annealing. The size of precipitates in ferrite rolled sample is generally larger than that in austenite rolled sample. Compared to austenite rolled sample, the ferrite rolled and annealed one has better formability and its r value reaches 2.36. Different from laboratory production, the test steels were acquired from industrial trial, and all the result can be used in industrial production directly.