首页>
中文期刊>
《钢铁研究学报:英文版》
>Effects of embedding direct reduction followed by magnetic separation on recovering titanium and iron of beach titanomagnetite concentrate
Effects of embedding direct reduction followed by magnetic separation on recovering titanium and iron of beach titanomagnetite concentrate
Embedding direct reduction followed by magnetic separation was conducted to fully recover iron and titanium separately from beach titanomagnetite(TTM).The influences of reduction conditions,such as molar ratio of C to Fe,reduction time,and reduction temperature,were studied.The results showed that the TTM concentrate was reduced to iron and iron-titanium oxides,depending on the reduction time,and the reduction sequence at 1 200°C was suggested as follows:Fe_(2.75)Ti_(0.25)O_4→Fe_2TiO_4→FeTiO_3→FeTi_2O_5.The reduction temperature played a considerable role in the reduction of TTM concentrates.Increasing temperature from 1 100 to 1 200°C was beneficial to recovering titanium and iron,whereas the results deteriorated as temperature increased further.The results of X-ray diffraction and scanning electron microscopy analyses showed that low temperature(≤1 100°C)was unfavorable for the gasification of reductant,resulting in insufficient reducing atmosphere in the reduction process.The molten phase was formed at high temperatures of 1 250-1 300°C,which accelerated the migration rate of metallic particles and suppressed the diffusion of reduction gas,resulting in poor reduction.The optimum conditions for reducing TTM concentrate are as follows:molar ratio of C to Fe of 1.68,reduction time of 150 min,and reduction temperature of 1 200°C.Under these conditions,direct reduction iron powder,assaying 90.28 mass%TFe and 1.73 mass% TiO_2 with iron recovery of 90.85%,and titanium concentrate,assaying 46.24mass% TiO_2 with TiO_2 recovery of 91.15%,were obtained.
展开▼