Weigh-in-Motion(WIM) technique is the process of measuring the dynamic tire forces of a moving vehicle and estimating the corresponding tire loads of the static vehicle. Compared with the static weigh station, WIM station is an efficient and cost effective choice that will minimize unneccessary stops and delay for truckers. The way to turn birefringence of single-mode fiber into a prime quality for a powerful and reliable sensor is shown. Preliminary results for the development of a weigh-in-motion (WIM) technique based on sagnac-loop sensor are presented. After a brief description of the sensor and its principle of operation, the theoretical model is developed. Then, a full characterization made in static conditions is presented.
展开▼