Mechanical properties of the warm compacted iron base powder metallurgy materials were compared with those of conventional cold compacted materials. Factors such as compaction temperature, lubricant concentration and lubricant′s property were studied. A lubricant for warm compaction powder metallurgy was developed. An iron based powder metallurgy material with a green density of 7.31 g/cm 3 (a relative density of 92.5%) can be obtained by pressing the powder at 700 MPa and 175 ℃. The sintered materials have a density of 7.2 g/cm 3, an elongation of 2.1% and a tensile strength of 751 MPa compared to 546 MPa using conventional cold compaction with the same lubricant and 655 MPa using warm compaction with other lubricant. Compact density and mechanical properties were influenced strongly by the compacting temperature. Although the best quality compacts can be obtained at 175 ℃, warm compaction within 165 to 185 ℃ can give high density compacts. Evidence shows that compact density depends on the friction coefficient of the lubricant.
展开▼