The objective is to develop an approach for the determination of the target reliability index for serviceability limit state (SLS) of single piles. This contributes to conducting the SLS reliability-based design (RBD) of piles. Based on a two-parameter, hyperbolic curve-fitting equation describing the load?settlement relation of piles, the SLS model factor is defined. Then, taking into account the uncertainties of load?settlement model, load and bearing capacity of piles, the formula for computing the SLS reliability index (βsls) is obtained using the mean value first order second moment (MVFOSM) method. Meanwhile, the limit state function for conducting the SLS reliability analysis by the Monte Carlo simulation (MCS) method is established. These two methods are finally applied to determine the SLS target reliability index. Herein, the limiting tolerable settlement (slt) is treated as a random variable. For illustration, four load test databases from South Africa are compiled again to conduct reliability analysis and present the recommended target reliability indices. The results indicate that the MVFOSM method overestimatesβsls compared to that computed by the MCS method. Besides, both factor of safety (FS) and slt are key factors influencingβsls, so the combination of FS andβsls is welcome to be used for the SLS reliability analysis of piles when slt is determined. For smaller slt, pile types and soils conditions have significant influence on the SLS target reliability indices; for larger slt, slt is the major factor having influence on the SLS target reliability indices. This proves that slt is the most key parameter for the determination of the SLS target reliability index.
展开▼
