首页> 外文期刊>自动化学报(英文版) >Two-Order Approximate and Large Stepsize Numerical Direction Based on the Quadratic Hypothesis and Fitting Method
【24h】

Two-Order Approximate and Large Stepsize Numerical Direction Based on the Quadratic Hypothesis and Fitting Method

机译:基于二次假设和拟合方法的二阶近似和大步长数值方向

获取原文
获取原文并翻译 | 示例
       

摘要

Many effective optimization algorithms require partial derivatives of objective functions, while some optimization problems' objective functions have no derivatives. According to former research studies, some search directions are obtained using the quadratic hypothesis of objective functions. Based on derivatives, quadratic function assumptions, and directional derivatives, the computational formulas of numerical first-order partial derivatives, second-order partial derivatives, and numerical second-order mixed partial derivatives were constructed. Based on the coordinate transformation relation, a set of orthogonal vectors in the fixed coordinate system was established according to the optimization direction. A numerical algorithm was proposed, taking the second order approximation direction as an example. A large stepsize numerical algorithm based on coordinate transformation was proposed. Several algorithms were validated by an unconstrained optimization of the two-dimensional Rosenbrock objective function. The numerical second order approximation direction with the numerical mixed partial derivatives showed good results. Its calculated amount is 0.2843% of that of without second-order mixed partial derivative. In the process of rotating the local coordinate system 360°, because the objective function is more complex than the quadratic function, if the numerical direction derivative is used instead of the analytic partial derivative, the optimization direction varies with a range of 103.05°. Because theoretical error is in the numerical negative gradient direction, the calculation with the coordinate transformation is 94.71% less than the calculation without coordinate transformation. If there is no theoretical error in the numerical negative gradient direction or in the large-stepsize numerical optimization algorithm based on the coordinate transformation, the sawtooth phenomenon occurs. When each numerical mixed partial derivative takes more than one point, the optimization results cannot be improved. The numerical direction based on the quadratic hypothesis only requires the objective function to be obtained, but does not require derivability and does not take into account truncation error and rounding error. Thus, the application scopes of many optimization methods are extended.

著录项

  • 来源
    《自动化学报(英文版)》 |2020年第3期|901-909|共9页
  • 作者单位

    School of Mechanical and Electrical Engineering China University of Petroleum(East China) Qingdao 266580;

    School of Pipeline and Civil Engineering China University of Petroleum(East China) Qingdao 266580;

  • 收录信息 中国科学引文数据库(CSCD);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

  • 入库时间 2022-08-19 04:42:31
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号