Methods of exploitation drainage, which is presently applied in polish hard coal mines in Upper Silesian Coal Basin (Poland), are not effective enough, high risk of methane hazard can be observed, and produc-tion capacity of the mining plant is not fully used. Methane hazard, which may occur during planned coal exploitation, is presented in this paper. Following parameters are taken into consideration in the fore-casts:coal extraction parameters, geological and mining conditions, deposit’s methane saturation degree and impact of coal exploitation on the degasification coefficient of the seams, which are under the influ-ence of relaxation zone. This paper presents the results of the analysis aiming to verify applicability of drainage ahead of mining of the coal seams by using surface directional wells. Based on the collected data (coal seams’ structural maps, profiles of the exploratory wells, geological cross-sections), the lab tests of drilling cores and direct wells’ tests, static model of the deposit was constructed and suitable grid of directional wells from the surface was designed. Comparison of forecasted methane emission volume between the two methods is investigated. The results indicated the necessity of performing appropriate deposit’s stimulations in order to increase effectiveness of drainage ahead of mining.
展开▼
