The present study was carried out to evaluate resonant frequency of the ground and to characterize subsurface ground based on shear wave velocity structure. For this, five sites were selected such as Pulchowk, Chhauni, Gaushala, Buddhanagar and Bhainsepati. About 20 data were recorded in each site and then shear wave velocity structure and graph of amplification ratio with their spatial distribution has been established with the help of software i.e. Seisimager/Seismodule Controller. The results of both analysis methods were then compared to the amplitude of the Gorkha Earthquake and borehole data. All these data and study indicates that the Kathmandu Valley sediments are dependent on the frequency of the seismic waves and the wave velocity is greater in the peripheral region than in the central part of the Valley. The result had also shown that the presence of silty-sand, clay and loose gravel soil with low bearing capacity and elastic modulus in most of the sites are responsible for devastation. It was also noted that apart from few limitations, a non-intrusive microtremor analysis can be adopted for earthquake site characterization in the Kathmandu Valley which can be readily applied and expanded upon in future seismic hazard and microzonation efforts for Kathmandu.
展开▼
