首页> 外文期刊>数据分析和信息处理(英文) >Dynamic Deformation Monitoring of Lotsane Bridge Using Global Positioning Systems (GPS) and Linear Variable Differential Transducers (LVDT)
【24h】

Dynamic Deformation Monitoring of Lotsane Bridge Using Global Positioning Systems (GPS) and Linear Variable Differential Transducers (LVDT)

机译:全球定位系统(GPS)和线性可变差压传感器(LVDT)的Lotsane桥梁动态变形监测

获取原文
获取原文并翻译 | 示例
       

摘要

The measurements and analysis of deformation of engineering structures such as dams, bridges and high-rise buildings are important tasks for civil engineers. It is evident that, all civil engineering structures are susceptible for deterioration over a period of time. Bridges in particular, deteriorate due to loading conditions, environmental changes, earth movement, material used during construction, age and corrosion of steel. Continuous monitoring of such structure is the most important aspect as it provides quantitative information, assesses the state of the structure, detects unsafe positions and proposes early safety measures to be taken before it can threaten the safety of vehicles, goods and human life. Despite government’s efforts to construct roads and highways, bridge deformation monitoring has not been given priority in most of African countries and ultimately causes some bridges to collapse unexpectedly. The purpose of this research is to integrate Global Positioning System (GPS) and Linear Variable Differential Transducers (LVDT) to monitor deformation of a bridge. The horizontal positions of reference and monitoring points were determined using Global Positioning System (GPS) while the vertical deflections, accelerations and strain were determined using Linear Variable Differential Transducers (LVDT). The maximum displacements obtained between zero and first epochs in x, y and z components were 0.798 m, at point LT08, 0.865 m at point BR13, and 0.56 m at point LT02 respectively. The maximum deflections for LVDT 1, 2 and 3 are 28.563 mm, 31.883 mm and 40.926 mm respectively. Finally, the correlation coefficient for the observations was 0.679 with standard deviations of 0.0168 and 0.0254 in x and y respectively. Our results identified some slight displacements in horizontal components at the bridge.
机译:电压,桥梁和高层建筑等工程结构变形的测量和分析是土木工程师的重要任务。显而易见的是,所有土木工程结构都易于在一段时间内恶化。特别是由于装载条件,环境变化,地球运动,钢的腐蚀期间使用的材料而导致的桥梁劣化。持续监测这种结构是最重要的方面,因为它提供了定量信息,评估了结构的状态,检测不安全的职位,并提出要采取的早期安全措施,以威胁到威胁车辆,商品和人类生活。尽管政府努力建造道路和公路,但桥梁变形监测尚未在大多数非洲国家获得优先权,最终导致一些桥梁意外崩溃。本研究的目的是将全球定位系统(GPS)和线性可变差分传感器(LVDT)集成,以监测桥梁的变形。使用全球定位系统(GPS)确定参考和监测点的水平位置,而使用线性可变差分换能器(LVDT)测定垂直偏转,加速度和菌株。在X,Y和Z组分中的零和第一时期在X,Y和Z组分之间获得的最大位移为0.798M,点LT08,0.865m处,点击点LT02处的0.56μm。 LVDT 1,2和3的最大偏转分别为28.563mm,31.883mm和40.926mm。最后,观察结果的相关系数为0.679,分别具有0.0168和0.0254的标准偏差。我们的结果确定了桥梁的水平部件中的一些轻微位移。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号