首页> 外文期刊>工程与科学中的计算机建模(英文) >Kautz Function Based Continuous-Time Model Predictive Controller for Load Frequency Control in a Multi-Area Power System
【24h】

Kautz Function Based Continuous-Time Model Predictive Controller for Load Frequency Control in a Multi-Area Power System

机译:基于KAUTZ功能的连续时间模型预测控制器,用于多区电力系统中的负载频率控制

获取原文
获取原文并翻译 | 示例
       

摘要

A continuous-time Model Predictive Controller was proposed using Kautz function in order to improve the performance of Load Frequency Control(LFC).A dynamic model of an interconnected power system was used for Model Predictive Controller(MPC)design.MPC predicts the future trajectory of the dynamic model by calculating the optimal closed loop feedback gain matrix.In this paper,the optimal closed loop feedback gain matrix was calculated using Kautz function.Being an Orthonormal Basis Function(OBF),Kautz function has an advantage of solving complex pole-based nonlinear system.Genetic Algorithm(GA)was applied to optimally tune the Kautz function-based MPC.A constraint based on phase plane analysis was implemented with the cost function in order to improve the robustness of the Kautz function-based MPC.The proposed method was simulated with three area interconnected power system and the efficiency of the proposed method was measured and exhibited by comparing with conventional Proportional and Integral(PI)controller and Linear Quadratic Regulation(LQR).
机译:使用Kautz函数提出了连续时间模型预测控制器,以提高负载频率控制的性能(LFC)。用于模型预测控制器(MPC)设计的互连电力系统的动态模型.MPC预测未来轨迹通过计算最佳闭环反馈增益矩阵的动态模型。在本文中,使用Kautz函数来计算最佳闭环反馈增益矩阵。对于正交基函数(OBF),Kautz函数具有解决复杂极点的优点 - 基于非线性系统。应用基于基于Kautz函数的MPC的非线性系统。基于相平面分析的基于KAutz函数的MPC,以提高基于KAUTZ函数的MPC的鲁棒性,实现了基于相平面分析的约束。提出的用三个区域互连的电力系统模拟方法,并通过与常规比例进行比较来测量和表现出所提出的方法的效率和积分(PI)控制器和线性二次调节(LQR)。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号