The aim of this work was to develop and characterize a polyester matrix composite material based on Canarium schweinfurthii Engl core granule. The particle size and the mass fractions of these cores used as fillers in this composite were the two optimization parameters. The experimentation of the twelve sample areas was based on the following optimization parameters: Three particles sizes of 80 1 2 3 ·m-3, which allows us to admit that this composite belongs to the family of light materials. The maximum compressive stress at break was obtained for the formulation 40% filler of size T3. This compressive stress at maximum rupture is in the range of 199.14 MPa. From 0% to 45% of filler, the flexural Young’s modulus of the composite increases whatever the particle size. The highest value is obtained for T2 particle size, i.e. 13.11 GPa. The static friction coefficient of the composite on wood increases as the filler content varies from 0.30 to 0.42. Thus, in view of the properties obtained, this composite can be used as alternative solutions in industrial applications, for the manufacturing of shoe heel, house ceiling, floors for housing and table support.
展开▼
