Parallel connection of multiple inverters is an important means to solve the expansion,reserve and protection of distributed power generation,such as photovoltaics.In view of the shortcomings of traditional droop control methods such as weak anti-interference ability,low tracking accuracy of inverter output voltage and serious circulation phenomenon,a finite control set model predictive control(FCS-MPC)strategy of microgrid multiinverter parallel system based on Mixed Logical Dynamical(MLD)modeling is proposed.Firstly,the MLD modeling method is introduced logical variables,combining discrete events and continuous events to form an overall differential equation,which makes the modeling more accurate.Then a predictive controller is designed based on the model,and constraints are added to the objective function,which can not only solve the real-time changes of the control system by online optimization,but also effectively obtain a higher tracking accuracy of the inverter output voltage and lower total harmonic distortion rate(Total Harmonics Distortion,THD);and suppress the circulating current between the inverters,to obtain a good dynamic response.Finally,the simulation is carried out onMATLAB/Simulink to verify the correctness of the model and the rationality of the proposed strategy.This paper aims to provide guidance for the design and optimal control of multi-inverter parallel systems.
展开▼
机译:Control and Dynamic Manipulability of a Dual-arm/Hand Robotic Exoskeleton System (EXO-UL8) for Rehabilitation Training in Virtual Reality =虚拟现实中用于康复训练的双臂/手机器人外骨骼系统(EXO-UL8)的控制和动力可操作性
机译:G. p. Liu,J.B.Yang和J.F.Whidborne,multiobjective optimization and Control,series:Engineering systems modeling and Control,Research studies press(2003)IsBN 0 86380 264 8。
机译:ada编译器验证摘要报告。证书编号:900726W1.11017,Verdix Corporation VaDs IBm RIsC system / 6000,aIX 3.1,Vada-110-7171,版本6.0 IBm RIsC system / 6000 model 530 => IBm RIsC system / 6000 model 530