首页> 外文期刊>中国海洋湖沼学报(英文版) >CNOP-P-based parameter sensitivity for double-gyre variation in ROMS with simulated annealing algorithm
【24h】

CNOP-P-based parameter sensitivity for double-gyre variation in ROMS with simulated annealing algorithm

机译:基于CNOP-P的ROMS双回转变化参数敏感性的模拟退火算法

获取原文
获取原文并翻译 | 示例
           

摘要

Reducing the error of sensitive parameters by studying the parameters sensitivity can reduce the uncertainty of the model, while simulating double-gyre variation in Regional Ocean Modeling System (ROMS). Conditional Nonlinear Optimal Perturbation related to Parameter (CNOP-P) is an effective method of studying the parameters sensitivity, which represents a type of parameter error with maximum nonlinear development at the prediction time. Intelligent algorithms have been widely applied to solving Conditional Nonlinear Optimal Perturbation (CNOP). In the paper, we proposed an improved simulated annealing (SA) algorithm to solve CNOP-P to get the optimal parameters error, studied the sensitivity of the single parameter and the combination of multiple parameters and verified the effect of reducing the error of sensitive parameters on reducing the uncertainty of model simulation. Specifically, we firstly found the non-period oscillation of kinetic energy time series of double gyre variation, then extracted two transition periods, which are respectively from high energy to low energy and from low energy to high energy. For every transition period, three parameters, respectively wind amplitude (WD), viscosity coefficient (VC) and linear bottom drag coefficient (RDRG), were studied by CNOP-P solved with SA algorithm. Finally, for sensitive parameters, their effect on model simulation is verified. Experiments results showed that the sensitivity order is WD>VCRDRG, the effect of the combination of multiple sensitive parameters is greater than that of single parameter superposition and the reduction of error of sensitive parameters can effectively reduce model prediction error which confirmed the importance of sensitive parameters analysis.
机译:通过研究参数敏感度来减少敏感参数的误差可以减少模型的不确定性,同时可以模拟区域海洋建模系统(ROMS)中的双旋流变化。与参数有关的条件非线性最优摄动(CNOP-P)是研究参数灵敏度的有效方法,它代表了预测时非线性发展最大的一种参数误差。智能算法已被广泛应用于求解条件非线性最优摄动(CNOP)。本文提出了一种改进的模拟退火算法(SA),以解决CNOP-P以获得最优参数误差的问题,研究了单参数和多参数组合的敏感性,并验证了减少敏感参数误差的效果减少模型仿真的不确定性。具体而言,我们首先发现了双回转变化的动能时间序列的非周期振荡,然后提取了两个过渡时期,分别是从高能到低能以及从低能到高能。对于每个过渡期,使用SA算法求解的CNOP-P研究了风振幅(WD),粘度系数(VC)和线性底部阻力系数(RDRG)这三个参数。最后,对于敏感参数,验证了它们对模型仿真的影响。实验结果表明,灵敏度顺序为WD> VC RDRG,多个敏感参数组合的影响大于单个参数叠加的影响,敏感参数误差的减小可以有效地减小模型预测误差,从而证明了模型的重要性。敏感参数分析。

著录项

  • 来源
    《中国海洋湖沼学报(英文版)》 |2019年第3期|957-967|共11页
  • 作者单位

    School of Software Engineering, Tongji University, Shanghai 201804, China;

    School of Software Engineering, Tongji University, Shanghai 201804, China;

    School of Software Engineering, Tongji University, Shanghai 201804, China;

    School of Software Engineering, Tongji University, Shanghai 201804, China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号