Microstructure and mechanical properties of Ti6Al4V/Cu-10Sn bronze diffusion-bonded joint

摘要

The microstructures and mechanical properties of Ti6Al4V/Cu-10Sn bronze diffusion-bonded joint were studied via scanning electron microscopy(SEM)and energy dispersive spectrometry(EDS).Diffusion bonding of Ti6Al4V to Cu-10Sn bronze was investigated at different holding time.Four obvious interfacial layers were observed in the joint.It is revealed that the bonding joint has high shear strength up to 102 MPa bonded at 830°C,bonding pressure 10 MPa and bonding time 15 min.Shear test results show that the fracture takes place between the reaction layer and the Cu-10Sn bronze substrate,and the shear strength is strongly related to the formation of Cu-Ti-Sn intermetallic compounds.