Microstructures and deformation properties of Ti-46Al-(Cr,Nb,W,B)alloy consolidated by pseudo-HIP technology were investigated.The results show that the pseudo-HIP temperature has a significant effect on microstructures.When the sintering temperature is 1 100℃,the microstructure of as-pseudo-HIPped alloy is similar to that of the prealloyed powder and the interfaces of these powder particles are still discernible,but a nearγmicrostructure appears in particles.Increasing the pressing temperature to 1 200℃develops successfully a homogeneous and fine-grained duplex microstructure.A typically fully lamellar microstructure with residualβphase is developed at 1 300℃.The compact exhibits excellent deformation properties at elevated temperatures. When the compression temperature is higher than 1 100℃,high quality products without cracks can be obtained even if the engineering compression strain is up to 0.8 at strain rates of 10-2-10-3s-1.It can be established that the mechanical twinning and matrix deformation due to ordinary dislocation slip/climb contribute to the whole hot deformation.
展开▼
