In the assembly process of large volume product,engineering constraints limit the relative pose of components and serve as a standard for judging assembly quality.However,in the traditional process of target pose estimation,a general method is needed for establishing the correlation between engineering constraints and product pose,and it is difficult to evaluate pose by constraints comprehensively.Therefore,the process of target pose estimation and evaluation is separated.In this paper,a pose coordination model based on multi-constraints is proposed,which includes pre-processing,pose estimation,pose adjustment and evaluation.Firstly,engineering constraints are decoupled into 4 types of Minimum Geometrical Reference Constraints(MGRC),and the inequalities for solving target pose are formulated.Then the Constraint Coordination Index(CCI)is defined as the optimization objective to solve the target pose.Finally,with CCI as the numerical index,the target pose is evaluated to illustrate the quality of assembly.Taking the simulation experiment of wing-fuselage jointing as an example,the external and internal parameters of model are analyzed,and the pose estimation based on multi-constraints reduces the CCI by 12%,compared with the point-set-registration method.
展开▼
