The ZrO_2 ceramic was successfully jointed to stainless steel by vacuum brazing with active filler metal. The AgCuTi active filler metal was used and the joining was performed at a temperature of 850 ℃ for 10 min. The microstructures of the joints were characterized by metallographic microscopy,scanning electron microscopy( SEM),and energy dispersive spectroscopy( EDS).Metallographic microscopy analysis shows that the morphology of the cross section was a sandwich structure and the Ti O is observed in the surface of ZrO_2/stainless steel. The diffusion and enrichment of the elements are the key roles in the brazing of ZrO_2 ceramic and stainless steel. The formation of TiCu compounds inhibited the further diffusion of titanium into stainless steel or the ZrO_2 ceramic to form TiO compound. In the experimental conditions,the average tensile strength is 80 MPa for the joint of ZrO_2 ceramic/Ag Cu Ti/stainless steel systems. A complete joint is formed between the ZrO2 ceramic and stainless steel with the leakage rate at the degree of 10^(-12) Pa·m^3/s.
展开▼
