Agglomerates formed in the fluidized bed were studied in this paper using the TEB atomization nozzle. The multi-sieving method was adopted to distinguish the size of original particles, nucleation agglomerates, coherence agglomerates, and paste agglomerates in order to successfully identify the different growth stages and select the region for coexistence of most stable heterogeneous agglomerates as the research object. A multi-channel conductance electrical circuit experimental device was developed in this study to measure the conductance signal, which was found to have a liner relationship with the moisture content inside the fluidized bed. By adjusting the sieve mesh openings to achieve the layered isolation of heterogeneous agglomerates, the conductance signal recovered slowly as a result of the agglomerates' fracture during the continuous fluidization process, so that particles and agglomerates moisture distribution measurements could be implemented. The device was used to measure the particles and agglomerates moisture distribution state in the heterogeneous coexistence region, when they were injected with liquid mass within the range of w i=2.8 kg to 4.4 kg. The results indicated that with the increase of liquid mass flow, the moisture content of coherence agglomerates also increased, but the moisture content of nucleation agglomerates was decreased, and that of the original particles was maintained at a relatively low level. When the experimental injection amount reached 4.4 kg, the moisture contained in coherence agglomerates could amount to 87.3%, accounting for a big percentage of moisture in the fluidized bed.
展开▼
