首页> 中文期刊> 《中国铸造:英文版》 >Study on the property of AI-Sn-Pb and its bush material clad with steel strip by liquid-solid bond rolling

Study on the property of AI-Sn-Pb and its bush material clad with steel strip by liquid-solid bond rolling

         

摘要

AISn8Pb2Si25Cu0.8Cr0.2(ASP) is a new bush material with high performance, but its bad plasticity limits itsapplication. By studying the effect of silicon content on the performance of this bush material, it was found that the alloyperformance and the distribution of tin and lead were affected by the silicon content. When the silicon content was 2.5%,most of the silicon precipitated along the grain boundary, and most of the lead and tin located along the grain boundarycontinuously, this resulted in the decrease of the bush material’s performance. When the silicon content decreased to 1.0%,it distributed more uniformly, the tin and lead phases were spheroidized and became discontinuous, the performance ofASP material was then greatly increased.
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号