HI-13串列加速器头部电压建模研究与硬件仿真平台设计

摘要

为方便对HI-13串列加速器的头部电压进行研究,提出了一针对HI-13串列加速器的头部电压模型,并验证了模型的有效性.建立了一基于嵌入式系统的头部电压硬件仿真平台,该仿真平台能接受与加速器工作时相同的控制输入量,通过内置在系统中的头部电压模型计算了头部电压的实际工作状态,并产生了与实际设备相同的输出量.通过建立头部电压硬件仿真平台,为控制系统的开发提供了研究对象,提高了控制系统开发的效率,为HI-13串列加速器后续的研究提供了基础.%For expediently studying the terminal voltage of HI-13 tandem accelerator, a terminal voltage model of HI-13 tandem accelerator was proposed, and the validity of the model was verified.Then a simulation platform of terminal voltage hardware was developed based on embedded system.The simulation platform can accept the control input as accelerator working.The real working state was calculated by means of simulation of terminal voltage model in the built-in system, and the same output was produced with the actual equipment.By establishing simulation platform of terminal voltage hardware, it can provide the research object for the development of the control system, and improve the efficiency of developing the control system.This study result will afford the basis on follow-up research work to the HI-13 tandem accelerator.