首页>
中文期刊>
《中国高等学校学术文摘·建筑与土木工程》
>Joint slip investigation based on finite element modelling verified by experimental results on wind turbine lattice towers
Joint slip investigation based on finite element modelling verified by experimental results on wind turbine lattice towers
Slippage corresponds to the relative displacement of a bolted joint subjected to shear loads since the construction clearance between the bolt shank and the bolthole at assembly can cause joint slip.Deflections of towers with joint slippage effects is up to 1.9 times greater than the displacements obtained by linear analytical methods.In this study,8 different types of joints are modelled and studied in the finite element program,and the results are verified by the experimental results which have been done in the laboratory.Moreover,several types of joints have been modelled and studied and load-deformation curves have also been presented.Finally,joint slip data for different types of angles,bolt diameter and bolt arrangements are generated.Thereupon,damping ratios (ζ) for different types of connections are reported.The study can be useful to help in designing of wind turbine towers with a higher level of accuracy and safety.
展开▼
机译:An introduction to the riometer system deployed at China-Iceland joint Arctic observatory and its beam- forming correction method based on the preliminary data
机译:Do Regional Integration Plans Promote Joint Prevention and Control of Air Pollution? - Lessons from China’s Major City Clusters =区域一体化进程带给大气污染联防联控的契机和挑战 - 基于中国国家级城市群发展的研究