首页> 外文学位 >Novel multiuser detection and multi-rate schemes for multi-carrier CDMA.
【24h】

Novel multiuser detection and multi-rate schemes for multi-carrier CDMA.

机译:用于多载波CDMA的新型多用户检测和多速率方案。

获取原文
获取原文并翻译 | 示例

摘要

A large variety of services is expected for wireless systems, in particular, high data rate services, such as wireless Internet access. Users with different data rates and quality of service (QoS) requirements must be accommodated. A suitable multiple access scheme is key to enabling wireless systems to support both the high data rate and the integrated multiple data rate transmissions with satisfactory performance and flexibility. A multi-carrier code division multiple access (MC-CDMA) scheme is a promising candidate for emerging broadband wireless systems. MC-CDMA is a hybrid of orthogonal frequency division multiplexing (OFDM) and code division multiple access (CDMA). The most salient feature of MC-CDMA is that the rate of transmission is not limited by the wireless channel's frequency-selective fading effects caused by multipath propagation. In MC-CDMA, each chip of the desired user's spreading code, multiplied by the current data bit, is modulated onto a separate subcarrier. Therefore, each subcarrier has a narrow bandwidth and undergoes frequency-flat fading. Two important issues for an MC-CDMA wireless system, multiuser detection and multi-rate access, are discussed in this dissertation.; Several advanced receiver structures capable of suppressing multiuser interference in an uplink MC-CDMA system, operating in a frequency-selective fading channel, are studied in this dissertation. One receiver is based on a so-called multi shot structure, in which the interference introduced by the asynchronous reception of different users is successfully suppressed by a receiver based on the minimum mean-square error (MMSE) criterion with a built-in de-biasing feature. Like many other multiuser schemes, this receiver is very sensitive to a delay estimation error. A blind adaptive two-stage decorrelating receiver based on the “bootstrap algorithm” is developed to combat severe performance degradation due to a delay estimation error. It is observed that in the presence of a delay estimation error the blind adaptive bootstrap receiver is more near-far resistant than the MMSE receiver. Furthermore, a differential bootstrap receiver is proposed to extend the limited operating range of the two-stage bootstrap receiver which suffers from a phase ambiguity problem.; Another receiver is based on a partial sampling (PS) demodulation structure, which further reduces the sensitivity to unknown user delays in an uplink scenario. Using this partial sampling structure, it is no longer necessary to synchronize the receiver with the desired user. Following the partial sampling demodulator, a minimum mean-square error combining (MMSEC) detector is applied. The partial sampling MMSEC (PS-MMSEC) receiver is shown to have strong interference suppression and timing acquisition capabilities. The complexity of this receiver can be reduced significantly, with negligible performance loss, by choosing a suitable partial sampling rate and using a structure called reduced complexity PS-MMSEC (RPS-MMSEC). The adaptive implementation of these receivers yields a superior rate of convergence and symbol error rate performance in comparison to a conventional MMSEC receiver with known timing.; All the above receiver structures are for a single-rate MC-CDMA. Three novel multi-rate access schemes for multi-rate MC-CDMA, fixed spreading length (FSL), coded FSL (CFSL) and variable spreading length (VSL), have been developed. These multi-rate access schemes enable users to transmit information at different data rates in one MC-CDMA system. Hence, voice, data, image and video can be transmitted seamlessly through a wireless infrastructure. The bit error rate performance of these schemes is investigated for both low-rate and high-rate users.
机译:对于无线系统,期望有各种各样的服务,特别是诸如无线因特网访问之类的高数据速率服务。必须容纳具有不同数据速率和服务质量(QoS)要求的用户。合适的多址方案是使无线系统能够以令人满意的性能和灵活性支持高数据速率和集成多数据速率传输的关键。多载波码分多址(MC-CDMA)方案是新兴宽带无线系统的有希望的候选方案。 MC-CDMA是正交频分复用(OFDM)和码分多址(CDMA)的混合体。 MC-CDMA的最显着特征是传输速率不受多径传播引起的无线信道的频率选择性衰落效应的限制。在MC-CDMA中,将所需用户的扩展码的每个码片乘以当前数据位,调制到单独的子载波上。因此,每个子载波具有较窄的带宽,并且经历频率平坦衰落。本文讨论了MC-CDMA无线系统的两个重要问题,即多用户检测和多速率接入。本文研究了几种在频率选择衰落信道中能够抑制上行MC-CDMA系统中多用户干扰的先进接收机结构。一个接收器基于所谓的多重发射结构,其中,由接收器基于最小均方误差(MMSE)准则并内置去噪功能,可以成功抑制由不同用户的异步接收引起的干扰。偏见功能。像许多其他多用户方案一样,此接收器对延迟估计误差非常敏感。开发了一种基于“自举算法”的盲自适应两级解相关接收机,以应对由于延迟估计误差而导致的严重性能下降。可以看出,在存在延迟估计误差的情况下,盲自适应自举接收机比MMSE接收机具有更强的抗远近性。此外,提出了一种差分自举接收机,以扩展遭受相位模糊问题的两级自举接收机的有限工作范围。另一个接收机基于部分采样(PS)解调结构,这进一步降低了上行链路场景中对未知用户延迟的敏感性。使用这种部分采样结构,不再需要将接收器与所需用户同步。在部分采样解调器之后,应用了最小均方误差合并(MMSEC)检测器。已显示部分采样MMSEC(PS-MMSEC)接收器具有强大的干扰抑制和定时捕获功能。通过选择合适的部分采样率并使用一种称为降低复杂度的PS-MMSEC(RPS-MMSEC)的结构,可以显着降低该接收机的复杂度,而性能损失可以忽略不计。与具有已知定时的传统MMSEC接收机相比,这些接收机的自适应实现产生了更高的收敛率和符号错误率性能。以上所有接收器结构均用于单速率MC-CDMA。已经开发了用于多速率MC-CDMA的三种新颖的多速率接入方案,固定扩展长度(FSL),编码的FSL(CFSL)和可变扩展长度(VSL)。这些多速率接入方案使用户能够在一个MC-CDMA系统中以不同的数据速率传输信息。因此,语音,数据,图像和视频可以通过无线基础设施无缝传输。对低速率和高速率用户都研究了这些方案的误码率性能。

著录项

  • 作者

    Zong, Pingping.;

  • 作者单位

    New Jersey Institute of Technology.;

  • 授予单位 New Jersey Institute of Technology.;
  • 学科 Engineering Electronics and Electrical.
  • 学位 Ph.D.
  • 年度 2001
  • 页码 103 p.
  • 总页数 103
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 无线电电子学、电信技术;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号