首页> 外文学位 >Open channel turbulent boundary layers and wall jets on rough surfaces.
【24h】

Open channel turbulent boundary layers and wall jets on rough surfaces.

机译:粗糙表面上的明渠湍流边界层和壁射流。

获取原文
获取原文并翻译 | 示例

摘要

For many industrial and environmental flows, the momentum and convective heat transfer rates at the surface are determined by the turbulence structure in the near-wall region. Although many flows of practical interest occur on rough surfaces, our understanding and ability to predict rough wall turbulent flows lags far behind the corresponding technology for smooth surfaces. This provides reasonable grounds for additional refined rough wall measurements with the expectation of improving our physical understanding of practically relevant turbulent flows.; This thesis reports an experimental investigation of wall roughness effects on the characteristics of turbulent boundary layers and wall jets. The measurements are obtained for smooth wall and three different roughness elements using a laser-Doppler anemometer. An insightful presentation of the results requires that the correct scaling laws must be used. In the case of the turbulent boundary layer, the appropriateness of the log law proposed by Millikan (1938) to model the overlap region of the mean flow and the power laws proposed by Barenblatt (1993) and George and Castillo (1997) is compared.; The boundary layer results show that the theory proposed by George and Castillo (1997) has important advantages over the log law in modeling the mean velocity profiles as well as predicting the wall shear stress. The results also show that wall roughness increases the turbulence fluctuations and transport terms, which suggests that rough wall turbulence models must explicitly account for roughness effects in order to predict the mixing characteristics accurately. This promises to provide significant challenges to rough wall turbulence models. The wall jet results show that wall roughness increases the inner layer thickness but the jet half-width does not show any important sensitivity to surface roughness. The spread rates for the jet half-width are higher than the values obtained in earlier measurements. This may be attributed to the high background turbulence levels in the present flow. It is also observed that the streamwise evolution of the mean flow is nearly independent of initial conditions when scaled using the exit kinematic momentum.
机译:对于许多工业和环境流,表面的动量和对流传热速率由近壁区域的湍流结构决定。尽管在粗糙表面上会产生许多实际感兴趣的流,但是我们对粗糙壁湍流的理解和预测能力远远落后于光滑表面的相应技术。这为进一步改进粗壁测量提供了合理的依据,以期提高我们对实际相关湍流的物理理解。本文对壁面粗糙度对湍流边界层和壁面射流特性的影响进行了实验研究。使用激光多普勒风速计获得光滑壁和三个不同粗糙度元素的测量值。要对结果进行深入分析,就必须使用正确的缩放定律。在湍流边界层的情况下,比较了Millikan(1938)提出的对数定律以模拟平均流的重叠区域以及Barenblatt(1993)和George and Castillo(1997)提出的幂定律的适用性。 ;边界层结果表明,George and Castillo(1997)提出的理论在模拟平均速度剖面以及预测壁面剪应力方面比对数定律具有重要优势。结果还表明,壁面粗糙度增加了湍流波动和输运项,这表明壁面湍流模型必须明确考虑粗糙度影响,才能准确预测混合特性。这有望给粗糙壁湍流模型带来重大挑战。壁喷射结果表明壁粗糙度增加了内层的厚度,但是喷射宽度的一半对表面粗糙度没有显示出任何重要的敏感性。喷嘴半宽的扩散率高于早期测量中获得的值。这可以归因于当前流中的高背景湍流水平。还观察到,当使用出口运动动量定标时,平均流量的沿流方向的演化几乎与初始条件无关。

著录项

  • 作者

    Tachie, Mark Francis.;

  • 作者单位

    The University of Saskatchewan (Canada).;

  • 授予单位 The University of Saskatchewan (Canada).;
  • 学科 Engineering Mechanical.
  • 学位 Ph.D.
  • 年度 2001
  • 页码 238 p.
  • 总页数 238
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 机械、仪表工业;
  • 关键词

  • 入库时间 2022-08-17 11:46:56

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号