首页> 外文学位 >The effects of designed scaffold architecture and biodegradable material on chondrogenesis in vitro and in vivo.
【24h】

The effects of designed scaffold architecture and biodegradable material on chondrogenesis in vitro and in vivo.

机译:设计的支架结构和可生物降解材料在体外和体内对软骨形成的影响。

获取原文
获取原文并翻译 | 示例

摘要

Poly (1, 8-octanediol-co-citric acid) (POC) is a synthetic biodegradable biocompatible elastomer that can be processed by solid freeform fabrication into 3D scaffolds for cartilage tissue engineering. We investigated the effect of designed porosity on the mechanical properties, permeability, and degradation profiles of the POC scaffolds. Increased porosity was associated with increased degradation rate, increased permeability, and decreased mechanical stiffness that also became less nonlinear.;One goal of this work was to examine the effects of pore shape and permeability of two different POC scaffold designs on matrix production, mRNA gene expression, and differentiation of chondrocytes in both in vitro and in vivo models and the consequent mechanical property changes of the scaffold/tissue constructs. We also examined the effects of collagen I gel concentration on chondrogenesis as a cell carrier and found that a lower collagen gel concentration provides a favorable microenvironment for chondrocytes. With regards to scaffold design, low permeability with a spherical pore shape better enhanced the chondrogenic performance of chondrocytes in terms of matrix production, cell phenotype, and mRNA gene expression in vitro and in vivo compared to the highly permeable scaffold with a cubical pore shape. There were higher mRNA expressions for cartilage specific proteins and matrix degradation proteins in the high permeable design in vivo, resulting in overall less sGAG retained in the high permeable scaffold compared with the low permeable scaffold.;In order to determine the scaffold material effects on cartilage regeneration, three dimensional polycaprolactone (PCL), poly (glycerol sebacate) (PGS), and POC scaffolds of the same design were physically characterized and tissue regeneration was compared to find which material would be most optimal for cartilage regeneration in vitro. POC provided the best support for cartilage regeneration while PGS was seen as the least favorable material based on mRNA expressions. PCL still provided microenvironments suitable for chondrocytes to be active, yet it seemed to cause de-differentiation of chondrocytes inside the scaffold while growing cartilage outside the scaffold.;Scaffold architectures and materials characterization and analysis in this work will provide design guidance for scaffolds to meet the mechanical and biological parameters needed for cartilage regeneration.
机译:聚(1,8-辛二醇-柠檬酸)(POC)是一种合成的可生物降解的生物相容性弹性体,可通过固体自由形式加工成3D支架进行软骨组织工程设计。我们研究了设计的孔隙度对POC支架的机械性能,渗透性和降解曲线的影响。孔隙率增加与降解速率增加,渗透率增加和机械刚度降低相关,非线性程度也降低。;这项工作的一个目标是检验两种不同POC支架设计的孔形状和渗透性对基质生产mRNA基因的影响在体外和体内模型中软骨细胞的表达,分化以及支架/组织构建体的机械性能改变。我们还检查了胶原蛋白I凝胶浓度对作为细胞载体的软骨形成的影响,发现较低的胶原蛋白凝胶浓度为软骨细胞提供了有利的微环境。关于支架设计,与具有立方体孔形状的高渗透性支架相比,具有球形孔形状的低渗透性在体外和体内在基质产生,细胞表型和mRNA基因表达方面更好地增强了软骨细胞的成软骨性能。在高渗透性体内设计中,软骨特异性蛋白和基质降解蛋白的mRNA表达较高,因此与低渗透性支架相比,高渗透性支架中保留的sGAG总体较少。;为了确定支架材料对软骨的影响再生时,对相同设计的三维聚己内酯(PCL),聚癸二酸甘油酯(PGS)和POC支架进行物理表征,并比较组织再生以发现哪种材料最适合体外软骨再生。基于mRNA表达,POC为软骨再生提供了最佳支持,而PGS被认为是最不利的材料。 PCL仍然提供了适合软骨细胞活跃的微环境,但是它似乎导致了支架内软骨细胞的去分化,同时在支架外生长软骨。这项工作中的支架结构和材料表征与分析将为支架满足设计提供指导。软骨再生所需的机械和生物学参数。

著录项

  • 作者

    Jeong, Gayoung Claire.;

  • 作者单位

    University of Michigan.;

  • 授予单位 University of Michigan.;
  • 学科 Engineering Biomedical.
  • 学位 Ph.D.
  • 年度 2010
  • 页码 187 p.
  • 总页数 187
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号