首页> 外文学位 >Accelerated MR thermometry for high intensity focused ultrasound therapy.
【24h】

Accelerated MR thermometry for high intensity focused ultrasound therapy.

机译:加速MR测温用于高强度聚焦超声治疗。

获取原文
获取原文并翻译 | 示例

摘要

The purpose of this dissertation was to investigate the temporal limit on the ability to measure temperature changes using magnetic resonance imaging (MRI). The limit was examined in experiments using a variety of imaging techniques for MRI-based temperature measurements. We applied these methods for monitoring temperature changes in focused ultrasound (FUS) heating experiments.;FUS is an attractive alternative to surgical resection due to its noninvasive character. FUS treatments have been successfully conducted in several clinical applications. MRI and MR thermometry is a natural choice for the guidance of FUS surgeries, given its ability to visualize, monitor, and evaluate the success of treatments. MR thermometry, however, can be a very challenging application, as good resolution is often needed along spatial, temporal as well as temperature axes. These three quantities are strictly related to each other, and normally it is theoretically impossible to simultaneously achieve high resolutions for all axes. In this dissertation, techniques were developed to achieve this at cost of some reduction in spatial coverage.;Given that the heated foci produced during thermal therapies are typically much smaller than the anatomy being imaged, much of the imaged field-of-view is not actually being heated and may not require temperature monitoring. By sacrificing some of the in-plane spatial coverage outside the region-of-interest (ROI), significant gains can be obtained in terms of temporal resolution. In the extreme, an ROI can be chosen to be a narrow pencil-like column, and a sampling time for temperature imaging is possible with a temporal resolution of a few milliseconds.;MRI-based thermal imaging, which maps temperature-induced changes in the proton resonance frequency, was implemented in two projects. In the first project, three previously described, fast MR imaging techniques were combined in a hybrid method to significantly speed up acquisition compared to the conventional thermometry. Acceleration factors up to 24-fold were obtained, and a temporal resolution as high as 320 milliseconds was achieved. The method was tested in a gel phantom and in bovine muscle samples in FUS heating experiments. The robustness of the hybrid method with respect to the cancellation of the fat signal, which causes temperature errors, and the incorporation of the method into an ultrafast, three dimensional sequence were also investigated. In the second project, a novel MR spectroscopic sequence was investigated for ultrafast one-dimension thermometry. Temperature monitoring was examined during FUS sonications in a gel phantom, SNR performance was evaluated in vivo in a rabbit brain, and feasibility was tested in a human heart. It was shown capable in a FUS heating experiment in a gel phantom of increasing temporal resolution to as high as 53 milliseconds in a three Tesla MRI. The temporal resolution achieved is an order of magnitude faster than any other rapid MR thermometry sequences reported. With this one-dimensional approach, a short sampling time as low as 3.6 milliseconds was theoretically achievable. However, given the SNR that could be achieved and the limited heating induced by FUS in the gel phantom in a few milliseconds, any temperature changes in such a short period were obscured by noise. We have analyzed the conditions whereby a temporal resolution of a few-milliseconds could be obtained.
机译:本文的目的是研究使用磁共振成像(MRI)测量温度变化的能力的时间限制。在使用各种成像技术进行基于MRI的温度测量的实验中检查了该极限。我们在聚焦超声(FUS)加热实验中应用了这些方法来监测温度变化。FUS由于其无创性而成为外科手术切除的有吸引力的替代方法。 FUS治疗已在几种临床应用中成功进行。 MRI和MR测温法是可视化,监视和评估治疗效果的能力,因此是指导FUS手术的自然选择。然而,MR测温可能是一个非常具有挑战性的应用,因为沿空间,时间以及温度轴通常需要良好的分辨率。这三个量彼此严格相关,并且通常在理论上不可能同时为所有轴实现高分辨率。在本文中,开发了一些技术来实现此目的,但要以减少空间覆盖为代价。鉴于热疗法过程中产生的受热灶通常比要成像的解剖体小得多,因此成像的大部分视场不是实际被加热,可能不需要温度监控。通过牺牲感兴趣区域(ROI)外部的一些平面内空间覆盖范围,可以在时间分辨率方面获得显着的收益。在极端情况下,可以将ROI选择为窄的铅笔状列,并且可以以几毫秒的时间分辨率进行温度成像的采样时间。基于MRI的热成像,可以绘制温度引起的变化。质子共振频率已在两个项目中实施。在第一个项目中,与常规测温法相比,在混合方法中结合了三种先前描述的快速MR成像技术,以显着加快采集速度。获得了高达24倍的加速因子,并且获得了高达320毫秒的时间分辨率。在FUS加热实验中,该方法在凝胶体模和牛肌肉样品中进行了测试。还研究了混合方法相对于消除脂肪信号(导致温度误差)的鲁棒性,并将该方法结合到超快三维序列中。在第二个项目中,研究了一种用于超快一维测温的新型MR光谱序列。在凝胶体模中进行FUS超声处理期间检查温度监控,在兔脑中体内评估SNR性能,并在人心脏中测试可行性。在FUS加热实验中,在三张Tesla MRI的凝胶体模中,该模型能够将时间分辨率提高到53毫秒,从而证明了它的能力。实现的时间分辨率比报告的任何其他快速MR测温序列快一个数量级。使用这种一维方法,理论上可以实现低至3.6毫秒的短采样时间。但是,考虑到可以实现的SNR以及凝胶体模中FUS在几毫秒内引起的有限加热,在如此短的时间内,任何温度变化都会被噪声掩盖。我们已经分析了可以获得几毫秒时间分辨率的条件。

著录项

  • 作者

    Mei, Chang-Sheng.;

  • 作者单位

    Boston College.;

  • 授予单位 Boston College.;
  • 学科 Health Sciences Radiology.
  • 学位 Ph.D.
  • 年度 2011
  • 页码 165 p.
  • 总页数 165
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号