首页> 外文学位 >A first-principles study of elastic and diffusion properties of magnesium based alloys.
【24h】

A first-principles study of elastic and diffusion properties of magnesium based alloys.

机译:镁基合金的弹性和扩散特性的第一性原理研究。

获取原文
获取原文并翻译 | 示例

摘要

In this thesis, the influence of alloying elements on the elastic and diffusion properties of Magnesium (Mg) has been studied based on first-principles density functional theory. The stress-strain method has been used to predict the elastic constants of the Mg based alloys studied herein. This method involves calculating the resultant change in stress due to application of strain. The validity of this method has been successfully tested for both 0K as well as at finite temperatures. The elastic constants predicted in this work have been correlated to ductility, fracture toughness, stiffness, elastic anisotropy and bond directionality, thus providing a better understanding of the influence of alloying elements on the mechanical and physical properties of Mg.;Elastic constants, as a function of temperature have been predicted using first-principles quasi-static approximation. In this approach elastic stiffness coefficients calculated with respect to volume (cij( V)) have been correlated to the equilibrium volume as a function of temperature V(T) from phonon calculations to obtain temperature dependence of elastic stiffness coefficients cij(T). To compare our calculated temperature dependent elastic constants with that of experiments an isentropic correction term has been introduced. It is seen that the influence of this isentropic correction term on the elastic constants becomes significant at high temperatures. The quasi-static approximation has been primarily applied to calculate temperature dependent elastic constants of Mg2Ge, Mg2Si, Mg 2Sn and Mg2Pb.;In the case of dilute Mg alloys, a 36 atom supercell with 35 atoms of Mg and one atom of the alloying impurity has been used for calculating the corresponding elastic constants. It is seen that there is a direct correspondence between the trends in the elastic constants and the lattice parameters of all the Mg based alloys studied herein. Elements that cause a decrease (increase) in the lattice constants result in an increase (decrease) in the bulk modulus.;Self-diffusion calculations of Mg have been performed within both LDA and GGA. It is seen that, in the absence of surface corrections, while results of the two approximations (i.e. LDA and GGA) bound experimental data, better agreement is seen with respect to results from LDA, in comparison with experimental measurements. The effect of thermal expansion on the diffusivity of Mg has been studied using both HA and QHA. It is seen that the influence of anharmonicity on the diffusivity of Mg is negligible. Self-diffusion of Mg is faster in the basal plane than between adjacent basal planes. Partial correlation factors corresponding to the diffusion of a Mg atom from one basal plane to the adjacent basal plane, i.e. fBx and fBz, decrease with temperature whereas the partial correlation factor corresponding to the diffusion of Mg atom within the basal plane, i.e. fAx , increases with temperature. The ratio of jump frequencies w⊥/w∥ for self-diffusion of Mg increase with increase in temperature.;The method used to calculate self-diffusion coefficients has been extended to compute impurity diffusion coefficients of Al, Ca, Sn and Zn in Mg. For these calculations, a 36 atom supercell with 1 vacant site and 1 impurity has been used. The 8-frequencey model has been implemented to obtain the different atom jump frequencies in order to calculate impurity diffusion coefficients in Mg. The trend in the impurity diffusion coefficients, with the exception of DZn-Mg is as follows: D Mg-Ca>DMg>DMg-Sn> DMg-Al. For impurity diffusion of Zn in Mg, at high temperatures DMg-Zn overlaps with that of DMg-Al , while at low temperatures it overlaps with that of D Mg-Sn. The different atom jump frequencies computed during the diffusion calculations are seen to be temperature dependent, increasing with increase in temperature. The correlation factors for all the alloy systems considered herein, is close to 1. This is expected to be due to the close packing of Mg lattice. (Abstract shortened by UMI.)
机译:本文基于第一性原理密度泛函理论研究了合金元素对镁弹性和扩散性能的影响。应力-应变方法已被用来预测本文研究的Mg基合金的弹性常数。该方法涉及计算由于施加应变而导致的应力变化。该方法的有效性已在0K和有限温度下成功进行了测试。这项工作中预测的弹性常数与延展性,断裂韧性,刚度,弹性各向异性和粘结方向性相关,因此可以更好地理解合金元素对镁的机械和物理性能的影响。温度的函数已经使用第一原理准静态近似进行了预测。在这种方法中,已通过声子计算将相对于体积(cij(V))计算的弹性刚度系数与平衡体积相关联,该平衡体积是温度V(T)的函数,以获得弹性刚度系数cij(T)的温度依赖性。为了将我们计算得出的温度相关弹性常数与实验结果进行比较,引入了等熵校正项。可以看出,该等熵校正项对弹性常数的影响在高温下变得显着。准静态近似法主要用于计算Mg2Ge,Mg2Si,Mg2Sn和Mg2Pb的温度相关弹性常数;在稀Mg合金的情况下,36个原子的超级电池具有35个Mg原子和一个原子的合金杂质。已经用于计算相应的弹性常数。可以看出,本文研究的所有基于镁的合金的弹性常数趋势与晶格参数之间都存在直接对应关系。导致晶格常数减小(增加)的元素导致体积模量增加(减小)。Mg的自扩散计算已在LDA和GGA中进行。可以看出,在没有表面校正的情况下,虽然两个近似值(即LDA和GGA)的结果限制了实验数据,但是与实验测量结果相比,LDA的结果具有更好的一致性。已经使用HA和QHA研究了热膨胀对Mg扩散率的影响。可以看出,非谐性对Mg扩散性的影响可以忽略不计。 Mg的自扩散在基底平面中比在相邻基底平面之间要快。与Mg原子从一个基底平面到相邻基底平面的扩散相对应的部分相关因子,即fBx和fBz,随温度而降低,而与Mg原子在基底平面内的扩散相对应的部分相关因子,即fAx,随着温度的升高而增加。随着温度。跳跃频率之比w⊥/ w∥随着温度的升高镁的自扩散系数也随之增加。扩展了自扩散系数的计算方法,以计算铝,钙,锡和锌在镁中的杂质扩散系数。为了进行这些计算,使用了一个具有1个空位和1个杂质的36原子超级电池。已实现8频率模型以获得不同的原子跳跃频率,以便计算Mg中的杂质扩散系数。除DZn-Mg外,杂质扩散系数的趋势如下:D Mg-Ca> DMg> DMg-Sn> DMg-Al。对于Zn在Mg中的杂质扩散,在高温下DMg-Zn与DMg-Al重叠,而在低温下它与D Mg-Sn重叠。扩散计算过程中计算出的不同原子跳变频率被视为与温度相关,并随温度的升高而增加。本文考虑的所有合金体系的相关因子均接近1。这可能是由于Mg晶格紧密堆积所致。 (摘要由UMI缩短。)

著录项

  • 作者

    Ganeshan, Swetha.;

  • 作者单位

    The Pennsylvania State University.;

  • 授予单位 The Pennsylvania State University.;
  • 学科 Engineering Materials Science.
  • 学位 Ph.D.
  • 年度 2011
  • 页码 205 p.
  • 总页数 205
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号