首页> 外文学位 >Effects of pressure on the mechanisms of soot formation and oxidation in laminar diffusion flames.
【24h】

Effects of pressure on the mechanisms of soot formation and oxidation in laminar diffusion flames.

机译:压力对层流扩散火焰中烟灰形成和氧化机理的影响。

获取原文
获取原文并翻译 | 示例

摘要

Soot processes within flames fueled with hydrocarbons are important because they affect the durability and performance of propulsion systems, the danger associated with unwanted fires, the pollutant and particulate emissions of combustion processes, local and global environments and the potential for developing computational combustion. The objective of the current work was to improve understanding of the processes controlling soot formation in combustion systems over a broad range of pressure conditions. The flame and soot structure, including primary soot particle nucleation, soot particle surface growth and oxidation properties, of round laminar diffusion flames were studied experimentally at pressures of 0.1-8.0 atm. Acetylene-nitrogen mixtures were used at pressures from 0.1 to 1.0 atm (in air coflow). Ethylene-helium mixtures were used at pressures from 1.0 to 8.0 atm (in oxygen/helium coflow). Soot concentrations, soot temperatures, soot structure, concentrations of major stable gas species, concentrations of radical species (H, OH, O), and flow velocities were measured along the axis of each flame studied.; The data were analyzed to determine local soot surface growth, oxidation and nucleation rates, as well as local flame properties that are thought to affect these rates. The measurements of soot surface growth rates were consistent with earlier measurements in laminar premixed and diffusion flames involving a variety of hydrocarbons at atmospheric pressure. In addition, the growth rates from all the available flames were in good agreement with each other and with existing hydrogen-abstraction/carbon-addition (HACA) soot surface growth mechanisms available in the literature.; Measurements of soot surface oxidation rates were consistent with earlier measurements, and the oxidation rates from all available flame data could be explained by reaction with OH; supplemented to only a minor degree by direct soot surface oxidation by O2.; A simplified method to estimate the soot nucleation rate was developed. The results indicated the nucleation rate was independent of pressure. In general, pressure effects on soot formation, growth and oxidation processes were well captured by existing theory over the broad range of conditions considered.
机译:用碳氢化合物燃料燃烧的火焰中的烟尘过程很重要,因为它们会影响推进系统的耐久性和性能,与不希望的火灾有关的危险,燃烧过程中的污染物和颗粒物排放,局部和全球环境以及发展计算燃烧的潜力。当前工作的目的是增进人们对在广泛的压力条件下控制燃烧系统中烟灰形成过程的理解。在0.1-8.0 atm的压力下,对圆形层流扩散火焰的火焰和烟灰结构进行了研究,包括一次烟灰颗粒成核,烟灰颗粒表面生长和氧化性能。乙炔-氮混合物的使用压力为0.1至1.0 atm(空气同流)。乙烯-氦气混合物的使用压力为1.0至8.0 atm(氧气/氦气并流)。沿每个研究的火焰轴测量烟灰浓度,烟灰温度,烟灰结构,主要稳定气体种类的浓度,自由基种类(H,OH,O)的浓度和流速。分析数据以确定局部烟灰表面生长,氧化和成核速率,以及认为会影响这些速率的局部火焰性质。烟灰表面生长速率的测量与在大气压力下层流预混火焰和涉及多种碳氢化合物的扩散火焰中的早期测量一致。此外,所有可用火焰的生长速率彼此之间以及文献中现有的氢吸收/碳添加(HACA)烟灰表面生长机理都非常吻合。烟尘表面氧化速率的测量与早期的测量结果一致,所有可用火焰数据的氧化速率都可以通过与OH的反应来解释。通过氧气直接吹灰表面进行少量补充。开发了一种估算烟灰成核率的简化方法。结果表明成核速率与压力无关。通常,在广泛考虑的条件范围内,现有理论已很好地捕获了压力对烟灰形成,生长和氧化过程的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号