首页> 外文学位 >Predicting the Settling Velocity of Lime Softening Flocs using Fractal Geometry.
【24h】

Predicting the Settling Velocity of Lime Softening Flocs using Fractal Geometry.

机译:使用分形几何预测石灰软化絮凝物的沉降速度。

获取原文
获取原文并翻译 | 示例

摘要

Stokes’ law that is traditionally used for modeling the sedimentation of flocs, incorrectly assumes that the floc is solid and spherical. Consequently the settling rates of flocs cannot be estimated using the Stokes law.;The application of fractal dimensions to study the internal structure and settling of flocs formed in lime softening process was investigated. An optical microscope with motorized stage was used to measure the fractal dimensions of lime softening flocs directly on their images in 2 and 3D space. The fractal dimensions of the lime softening flocs were 1.15-1.27 for floc boundary, 1.49-1.90 for cross-sectional area and 2.55-2.99 for floc volume. Free settling tests were used for indirect determination of 3D fractal dimension. The measured settling velocity of flocs ranged from 0.1 to 7.1 mm/s (average: 2.37 mm/s) for the flocs with equivalent diameters from 10µm to 260µm (average: 124 µm).;Floc settling model incorporating variable floc fractal dimensions as well as variable primary particle size was found to describe the settling velocity of large (>60 µm) lime softening flocs better than Stokes’ law. Settling velocities of smaller flocs (<60 µm) could still be quite well predicted by the Stokes’ law. The variation of fractal dimensions with lime floc size in this study indicated that two mechanisms are involved in the formation of these flocs: cluster-cluster aggregation for small flocs (>60 µm) and diffusion-limited aggregation for large flocs (<60 µm). Therefore, the relationship between the floc fractal dimension and floc size appears to be determined by floc aggregation mechanisms.;The settling velocity of lime softening flocs was also modeled by a general model that assumes multiple normally distributed fractal dimensions for each floc size. The settling velocities were in the range of 0-10mm/s and in good agreement with measured settling velocities (0.1-7.1mm/s). The Stokes’ law overestimates the settling velocity of lime flocs. It seems that the settling velocity of flocs is mainly controlled by aggregation mechanisms and forming large floc does not guarantee improved sedimentation.;The multifractal analysis of lime softening flocs showed that these aggregates are multifractal and a spectrum of fractal dimensions is required to describe the structure of an individual floc.
机译:传统上用于模拟絮凝物沉积的斯托克斯定律错误地假设絮凝物为固体和球形。因此,不能利用斯托克斯定律来估计絮凝物的沉降速率。研究了分形维数在研究石灰软化过程中形成的絮凝物的内部结构和沉降中的应用。使用带电动平台的光学显微镜直接在2D和3D空间的图像上测量石灰软化絮凝物的分形维数。石灰软化絮凝物的分形维数对于絮凝物边界为1.15-1.27,对于横截面积为1.49-1.90,对于絮凝物体积为2.55-2.99。使用自由沉降测试间接确定3D分形维数。对于等效直径为10μm至260μm(平均:124 µm)的絮凝物,测得的絮凝沉降速度范围为0.1至7.1 mm / s(平均:2.37 mm / s)。絮凝沉降模型还包含可变的絮体分形尺寸因为发现可变的初级粒径比斯托克斯定律更好地描述了大型(> 60 µm)石灰软化絮凝物的沉降速度。斯托克斯定律仍可以很好地预测较小絮状物(<60 µm)的沉降速度。该研究中分形维数随石灰絮凝物大小的变化表明,这些絮凝物的形成涉及两种机理:小絮凝物(> 60 µm)的团簇聚集和大絮凝物(<60 µm)的扩散限制聚集。 。因此,絮凝物分形维数与絮凝物大小之间的关系似乎是由絮凝物聚集机制决定的。石灰软化絮凝物的沉降速度也通过一个通用模型来建模,该模型假定每个絮凝物大小具有多个正态分布的分形维数。沉降速度在0-10mm / s的范围内,并且与测得的沉降速度(0.1-7.1mm / s)非常一致。斯托克斯定律高估了石灰絮的沉降速度。似乎絮凝物的沉降速度主要受聚集机制控制,形成较大的絮凝物并不能保证沉降的改善。石灰软化絮凝物的多重分形分析表明,这些聚集体是多重分形的,需要分形维数的光谱来描述结构单个絮状物。

著录项

  • 作者

    Vahedi, Arman.;

  • 作者单位

    University of Manitoba (Canada).;

  • 授予单位 University of Manitoba (Canada).;
  • 学科 Engineering Civil.;Engineering Environmental.
  • 学位 Ph.D.
  • 年度 2012
  • 页码 167 p.
  • 总页数 167
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号