首页> 外文学位 >A Scattering-Based Approach to the Design, Analysis, and Experimental Verification of Magnetic Metamaterials Made from Dielectrics.
【24h】

A Scattering-Based Approach to the Design, Analysis, and Experimental Verification of Magnetic Metamaterials Made from Dielectrics.

机译:基于散射的介电材料磁性超材料的设计,分析和实验验证方法。

获取原文
获取原文并翻译 | 示例

摘要

he design, modeling, fabrication, and validation of an optical magnetic response in dielectric-based metamaterials are studied. These metamaterials consist of either periodic or random arrays of dielectric particle inclusions, which may be spheres, coated spheres, or completely randomly shaped. It is demonstrated that because of the simple particle shapes and dielectric materials, these metamaterials are quite easy and feasible to implement in a bulk, three-dimensional sample, and the response is isotropic. This in is contrast to other predominant designs of optical metamaterials, which are planar and anisotropic arrays of complicated metallic fishnet or split-ring resonator structures, which require stringent tolerances and sophisticated assembly.;In the final portion of the dissertation, the mutual near-field coupling between ideal magnetic dipoles induced in dielectric spheres is studied. This is implemented for microwave frequencies using large permittivity ceramic spheres. An approximate coupled dipole model of the multiple scattering among the spheres is developed, and a transition matrix method is implemented to calculate the exact scattering by the clusters. Experimental measurements are performed, confirming the two models. The results for pairs, chains, and rings of spheres indicates that the magnetic dipole modes hybridize in analogy to atomic bonding. A notable result is that certain hybridized magnetic dipole modes may have a net electric dipole moment. The similarity to atomic and molecular bonding should prove useful in conceptualizing and designing more sophisticated metamaterials.;It is shown that SiC is one of many materials from which such infrared magnetic metamaterials can be constructed. A simple SiC powder is used to verify these claims. The milled micropowder of crystalline SiC is comprised of particles of random shapes and sizes. A model of the electromagnetic response of such powders is developed, whereby the induced magnetic dipole response is modeled by equivalently-sized spheres of SiC, whereas the electric dipole response is modeled by a continuous distribution of ellipsoidal particles. Infrared spectroscopic measurements and numerical calculations are performed, verifying both the magnetic and electric response of the powder. A alternate approach is also described, where uniform SiC microspheres are fabricated using more sophisticated nanochemical techniques.
机译:研究了基于介电的超材料中光磁响应的设计,建模,制造和验证。这些超材料由电介质颗粒夹杂物的周期性或随机阵列组成,这些介质可以是球形,涂层球形或完全随机成形。结果表明,由于简单的颗粒形状和介电材料,这些超材料非常容易和可行地实现在三维三维样本中,并且响应是各向同性的。这与光学超材料的其他主要设计形成对比,后者是复杂的金属鱼网或开口环谐振器结构的平面和各向异性阵列,需要严格的公差和复杂的组装。研究了介电球中感应的理想磁偶极子之间的场耦合。这是针对使用大介电常数陶瓷球的微波频率实现的。建立了球间多重散射的近似耦合偶极子模型,并采用转换矩阵方法计算了各簇的精确散射。进行实验测量,确认两个模型。球对,链和环的结果表明,磁偶极子模式与原子键合相似。一个显着的结果是某些混合磁偶极子模式可能具有净电偶极矩。与原子键合和分子键合的相似性在概念化和设计更复杂的超材料中应被证明是有用的。研究表明,SiC是可用于构造此类红外磁性超材料的众多材料之一。一种简单的SiC粉末用于验证这些主张。研磨后的结晶SiC微粉由形状和大小随机的颗粒组成。建立了此类粉末的电磁响应模型,从而通过等效尺寸的SiC球体对感应磁偶极响应进行了建模,而电偶极子响应则通过椭圆形颗粒的连续分布进行了建模。进行红外光谱测量和数值计算,以验证粉末的磁响应和电响应。还描述了另一种方法,其中使用更复杂的纳米化学技术制造均匀的SiC微球。

著录项

  • 作者

    Wheeler, Mark Stephen.;

  • 作者单位

    University of Toronto (Canada).;

  • 授予单位 University of Toronto (Canada).;
  • 学科 Engineering Electronics and Electrical.
  • 学位 Ph.D.
  • 年度 2010
  • 页码 134 p.
  • 总页数 134
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号