首页> 外文学位 >Light adjustable macromer-doped elastomers: The thermodynamics, transport, and photochemistry of silicones.
【24h】

Light adjustable macromer-doped elastomers: The thermodynamics, transport, and photochemistry of silicones.

机译:光可调节的掺有大单体的弹性体:硅酮的热力学,传输和光化学。

获取原文
获取原文并翻译 | 示例

摘要

Novel elastomeric photopolymer systems that exhibit macroscopic optical and mechanical changes when polymerized were designed and synthesized. These photopolymers consist of a well-defined polydimethylsiloxane matrix, an UV absorbing photoiniator, and a reactive macromer with methacrylate endgroups and a siloxane based midblock. Model elastomer matrices were synthesized, swollen with macromer, macromer was photopolymerized, and mechanical, transport, and thermodynamic behaviors of the resulting photoelastomers were measured.; Modulus increases of 50 to 150% were seen for sequential interpenetrating networks (IPNs) formed by photopolymerizing different length macromers in model networks. Modulus change was independent of network structure but highly dependent on macromer length and extent of macromer doping. With increased macromer doping, the modulus increase seen on photopolymerization changed from a theoretical dispersed phase behavior to bicontinuous phase behavior. Unexpectedly, mechanical properties were independent of photopolymerization conditions; increased photoinitiator content and irradiation intensity did not alter cured photopolymer modulus.; Swelling behavior for model networks and IPNs was independent of network precursor molecular weight and polymer volume fraction at network preparation. As macromer molecular weight increased, experimental scaling behavior approached theoretical values. For photopolymerized IPNs, macromer was a poorer solvent than in model networks. Macromer containing phenyl groups also showed significant decreases in solubility.; Diffusivity values ranged from 2x10-11 to 2x10 -12 m2/s for 1 to 5kg/mol macromer molecular weight in both model and interpenetrating networks, were dependent on penetrant molecular weight and host network modulus, and were independent of thermodynamic interaction parameters. Diffusivities of bimodal molecular weight distributions indicated dependence on host network modulus due to molecular sieving.; Photopolymerization of macromer swollen in networks shoved unusual reaction kinetics. Although reaction rates scaled linearly with reactive endgroup concentration for a specific macromer molecular weight, they exhibited variable dependence on initiation rate for different photoiniator concentrations and irradiation intensities. High irradiation intensity and photoinitiator concentration led to reaction rate independence on the initiation rate. Different macromer molecular weights showed unique reaction trajectories; maximum reaction rates and the time and extent of conversion at which they occur are not explained with simple scaling behavior. Chain length dependent termination measurements were used to describe reaction rate trajectories.
机译:设计并合成了新型的弹性体光聚合物体系,该体系在聚合时表现出宏观的光学和机械变化。这些光敏聚合物由定义明确的聚二甲基硅氧烷基体,吸收紫外线的光引发剂,具有甲基丙烯酸酯端基的反应性大分子单体和基于硅氧烷的中嵌段组成。合成模型弹性体基质,用大分子单体溶胀,使大分子单体光聚合,并测量所得光弹性体的机械,传输和热力学行为。对于通过在模型网络中光聚合不同长度的大分子单体而形成的顺序互穿网络(IPN),模量增加了50%至150%。模量变化与网络结构无关,但高度取决于大单体的长度和大单体掺杂的程度。随着大分子单体掺杂的增加,在光聚合中看到的模量增加从理论上的分散相行为变为双连续相行为。出乎意料的是,机械性能与光聚合条件无关。增加的光引发剂含量和辐照强度不会改变固化的光聚合物模量。模型网络和IPN的溶胀行为与网络制备时的网络前体分子量和聚合物体积分数无关。随着大分子单体分子量的增加,实验规模行为接近理论值。对于光聚合的IPN,大分子单体是比模型网络中差的溶剂。含有苯基的大分子单体也显示出溶解度的显着降低。在模型网络和互穿网络中,对于1至5kg / mol大分子分子量,扩散系数范围为2x10-11至2x10 -12 m2 / s,取决于渗透剂分子量和主体网络模量,并且与热力学相互作用参数无关。双峰分子量分布的扩散性表明由于分子筛而对宿主网络模量的依赖性。在网络中溶胀的大分子单体的光聚合反应产生了异常的反应动力学。虽然对于特定的大分子单体分子量,反应速率与反应性端基浓度呈线性比例关系,但对于不同的光引发剂浓度和辐照强度,它们对起始速率的依赖性不同。高辐照强度和光引发剂浓度导致反应速率与引发速率无关。不同的大分子单体分子量显示出独特的反应轨迹。最大的反应速率以及发生反应的时间和转化程度无法通过简单的缩放行为进行解释。链长相关的终止测量用于描述反应速率轨迹。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号