首页> 外文学位 >Fundamental investigation on removal and recovery of heavy metals from synthetic wastewater using magnetic nanoparticles.
【24h】

Fundamental investigation on removal and recovery of heavy metals from synthetic wastewater using magnetic nanoparticles.

机译:使用磁性纳米颗粒从合成废水中去除和回收重金属的基础研究。

获取原文
获取原文并翻译 | 示例

摘要

Nanoparticle adsorption coupled with magnetic separation was applied for the removal and recovery of heavy metals from industrial wastewater. Magnetic nanoparticles (e.g., magnetite, maghemite, metal ferrite) with a diameter of 10-20 nm were successfully synthesized in the laboratory. A comprehensive study was carried out in batch tests, involving the effects of adsorbate properties (e.g., metal concentration, coexisting ions and ligands), adsorbent properties (e.g., particle size, surface area and surface pretreatment), and operational parameters (e.g., pH, temperature and shaking speed). Maghemite (gamma-Fe 2O3) nanoparticles from simple oxidation of magnetite (Fe 3O4) were effectively used for the selective removal of Cr(VI), Cu(II) and Ni(II). Modified MnFe2O4 nanoparticles were successfully applied for the fast removal and recovery of Cr(VI) within 5 minutes and the initial 100 mg/L of Cr(VI) was reduced to less than 50 mug/L. The magnetic nanoparticles could be completely recovered for reuse.; Two methods involving metal-doping and surface-coating were developed to enhance the adsorption capacity of the original materials while preventing the nanoparticle dissolution under extreme conditions. The results from comparative studies showed that the Al-doping or delta-FeOOH-coating could promote the adsorption of Cr(VI) significantly without sacrificing other properties too much. The dissolution of modified nanoparticles was inhibited by 30-40%. Especially, the Al-doped gamma-Fe2O3 nanoparticles were found able to treat very acidic (pH 1) industrial wastewater.; Adsorption mechanism studies were conducted using XPS, FTIR and Raman spectroscopy. It is suggested that the uptake of Cr(VI) by Fe3O 4 nanoparticles could be a combination of physical adsorption and chemical redox reaction, the adsorption of Cr(VI) and Cu(II) by gamma-Fe2O 3 or modified MnFe2O4 nanoparticles could be due to electrostatic attraction and ion exchange; and the adsorption of Ni(II) by gamma-Fe2O3 nanoparticles could be as a result of electrostatic attraction only. Al-doping on gamma-Fe2O 3 changed the force between adsorbed CrO42- and nanoparticles from weak electrostatic attraction into specific complexation.
机译:纳米粒子吸附结合磁分离技术用于工业废水中重金属的去除和回收。在实验室中成功合成了直径为10-20 nm的磁性纳米颗粒(例如磁铁矿,磁赤铁矿,金属铁氧体)。在批处理测试中进行了全面的研究,涉及吸附物特性(例如,金属浓度,共存离子和配体),吸附剂特性(例如,粒径,表面积和表面预处理)以及操作参数(例如,pH)的影响,温度和摇动速度)。简单地从磁铁矿(Fe 3O4)氧化而得到的磁铁矿(γ-Fe2O3)纳米颗粒可有效地用于选择性去除Cr(VI),Cu(II)和Ni(II)。改性的MnFe2O4纳米粒子已成功应用于5分钟内快速去除和回收Cr(VI)的过程中,最初的100 mg / L Cr(VI)降低至小于50杯/ L。磁性纳米颗粒可以完全回收再利用。开发了两种涉及金属掺杂和表面涂覆的方法,以提高原始材料的吸附能力,同时防止纳米颗粒在极端条件下溶解。比较研究的结果表明,Al掺杂或δFeOOH涂层可以显着促进Cr(VI)的吸附,而不会过多牺牲其他性能。改性纳米颗粒的溶解被抑制30-40%。特别是,发现掺铝的γ-Fe2O3纳米颗粒能够处理酸性很强(pH 1)的工业废水。使用XPS,FTIR和拉曼光谱进行吸附机理研究。认为Fe3O 4纳米颗粒对Cr(VI)的吸收可能是物理吸附和化学氧化还原反应的结合,γ-Fe2O3或改性的MnFe2O4纳米颗粒对Cr(VI)和Cu(II)的吸附可能是由于静电吸引和离子交换; γ-Fe2O3纳米颗粒对Ni(II)的吸附可能仅仅是静电吸引的结果。铝在γ-Fe2O3上的掺杂将吸附的CrO42-和纳米颗粒之间的作用力从弱静电吸引变为特定的络合物。

著录项

  • 作者

    Hu, Jing.;

  • 作者单位

    Hong Kong University of Science and Technology (People's Republic of China).;

  • 授予单位 Hong Kong University of Science and Technology (People's Republic of China).;
  • 学科 Engineering Civil.; Engineering Environmental.; Engineering Sanitary and Municipal.
  • 学位 Ph.D.
  • 年度 2006
  • 页码 238 p.
  • 总页数 238
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 建筑科学;环境污染及其防治;建筑科学;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号