首页> 外文学位 >Detection of special nuclear material in hydrogenous cargo using differential die-away analysis.
【24h】

Detection of special nuclear material in hydrogenous cargo using differential die-away analysis.

机译:使用差模消失分析检测含氢货物中的特殊核材料。

获取原文
获取原文并翻译 | 示例

摘要

Differential Die Away Analysis is a sensitive technique to detect presence of fissile materials like 235U and 239Pu. In DDAA, a neutron generator produces repetitive pulses of neutrons which are directed into a cargo being inspected. As each pulse passes through the cargo, the neutrons are thermalized and absorbed. The thermalization process is very rapid and the population of all neutrons from source to epithermal neutrons decays away within microseconds. The population of thermal neutrons however decays much slower with the diffusion decay time of the inspected medium (thermal neutron die-away time), on the order of hundreds of microseconds. If special nuclear material (SNM) is present, the thermalized neutrons from the source will cause fissions that produce a new source of neutrons. These fast fission neutrons decay with a time very similar to that of the thermal neutron die away of the surrounding cargo.;Improvement of DDAA sensitivity can be obtained by advanced knowledge of the thermal-neutron kinetic properties of the inspected medium. The standard way to obtain such information is by measuring thermal neutron die-away by a detector inside of the medium. Since this is not practical in a real system, a method of determining information about thermal die-away properties of a medium from external measurements is examined. This method allows inspected media to be grossly characterized by their neutron moderating and attenuating characteristics.;The DDAA method provides a binary decision regarding the presence or absence of special nuclear material in an inspection medium. A detection algorithm was developed that utilizes advance knowledge of detector response to improve the decision quality.;The sensitivity of DDAA, for a given source of neutrons, critically depends on optimizing the fast and epithermal neutron detection system. The optimization involves both time response and detection efficiency. The optimized detectors were able to detect fissile material throughout pallets of hydrogenous cargo.
机译:差模消失分析是一种检测235U和239Pu等易裂变材料的灵敏技术。在DDAA中,中子发生器产生重复的中子脉冲,这些脉冲被引导到被检查的货物中。随着每个脉冲穿过货物,中子被加热并吸收。热化过程非常迅速,并且从源到超热中子的所有中子的数量在几微秒内衰减。然而,随着被检查介质的扩散衰减时间(热中子消失时间),热中子的数量衰减要慢得多,约为数百微秒。如果存在特殊的核材料(SNM),则源中的热中子将引起裂变,从而产生新的中子源。这些快速裂变中子的衰变时间与热中子从周围货物中消失的时间非常相似。通过对所检查介质的热中子动力学特性的深入了解,可以提高DDAA灵敏度。获取此类信息的标准方法是通过介质内部的检测器测量热中子的消失。由于这在实际系统中不切实际,因此研究了一种通过外部测量确定有关介质的热消失特性信息的方法。这种方法可以使被检查的介质通过其中子减速和衰减特性来大致表征。DDAA方法提供了一种关于检查介质中是否存在特殊核材料的二元决策。开发了一种检测算法,该算法利用对检测器响应的先进知识来提高决策质量。对于给定的中子源,DDAA的灵敏度关键取决于优化快速和超热中子检测系统。优化涉及时间响应和检测效率。经过优化的检测器能够检测整个含氢货物托盘中的易裂变物质。

著录项

  • 作者

    Jordan, Kelly Alexander.;

  • 作者单位

    University of California, Berkeley.;

  • 授予单位 University of California, Berkeley.;
  • 学科 Engineering Nuclear.
  • 学位 Ph.D.
  • 年度 2006
  • 页码 160 p.
  • 总页数 160
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 原子能技术;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号