首页> 外文学位 >Characterization of electrospun polymer fibers for applications in cardiac tissue engineering and regenerative medicine.
【24h】

Characterization of electrospun polymer fibers for applications in cardiac tissue engineering and regenerative medicine.

机译:用于心脏组织工程和再生医学的电纺聚合物纤维的表征。

获取原文
获取原文并翻译 | 示例

摘要

Electrospinning is a technique where a polymer solution is formed into a non-woven mat by electrically charging the solution as it leaves a capillary. The resulting mats have an interconnected porous network, and the system can be tailored in order to form aligned fibers. In this work, we have chosen to electrospin and characterize two polymers with unique properties with the intention to use them as scaffolds for cardiac tissue.; The first polymer studied was poly(N-isopropyl acrylamide) (pNIPAM), a material which shows a thermoresponsive behavior around 32°C in aqueous solutions. In this work, pNIPAM was electrospun into fibrous mats from three solvents and the resulting electrospun mats were evaluated using DSC, polarized Raman, and infrared spectroscopy and compared to the bulk material. It was found that the electrospinning process did not alter the polymer and pNIPAM maintained its thermoresponsive behavior. Therefore, it is believed that electrospun pNIPAM mats could have the potential to be used as templates or filters in aqueous solutions at high temperatures, above 32°C, and then removed by lowering the temperature.; The next polymer to be investigated was a biodegradable polyurethane (PU). The PU was electrospun into isotropic mats (ES-PU) and the material properties were evaluated via GPC, DSC, and Raman spectroscopy before and after processing. These analyses showed that the polymer was also unaffected by the electrospinning process. Additionally, the degradation profile of ES-PU in the presence of chymotrypsin was assessed. It was concluded that ES-PU mats show potential for use in soft tissue engineering applications.; Therefore, the next step in this research was to investigate the ability of ES-PU mats to support cardiac cells and direct tissuegenesis. Cells isolated from immature cardiac ventricles were grown on ES-PU mats with either aligned or unaligned microfibers. ES-PU cultures contained electrically-coupled, contractile myocytes and it was shown that fiber orientation influenced multi-cellular organization. Atrial natriuretic peptide (ANP) expression was significantly lower in cells grown on aligned scaffolds versus those grown on either isotropic ES-PU or on TCPS controls indicating that scaffold-imposed alignment resulted in a more mature cell phenotype. Therefore, it was concluded that the physical organization of ES-PU microfibers influences both multi-cellular form and cardiac cell function in vitro.
机译:电纺丝是一种技术,其中聚合物溶液在离开毛细管时通过充电使溶液形成非织造垫。所得的垫具有相互连接的多孔网络,并且可以定制该系统以形成对齐的纤维。在这项工作中,我们选择静电纺丝和表征两种具有独特性质的聚合物,以将它们用作心脏组织的支架。研究的第一个聚合物是聚(N-异丙基丙烯酰胺)(pNIPAM),该材料在水溶液中在32°C左右表现出热响应性能。在这项工作中,将pNIPAM从三种溶剂中静电纺制成纤维毡,然后使用DSC,偏振拉曼光谱和红外光谱对所得的静电纺毡进行评估,并与散装材料进行比较。发现电纺丝过程没有改变聚合物,并且pNIPAM保持了其热响应行为。因此,据信电纺pNIPAM垫可以在高于32℃的高温下用作水溶液中的模板或过滤器,然后通过降低温度将其除去。下一个要研究的聚合物是可生物降解的聚氨酯(PU)。将PU电纺入各向同性垫(ES-PU)中,并在加工前后通过GPC,DSC和拉曼光谱对材料性能进行评估。这些分析表明聚合物也不受静电纺丝工艺的影响。另外,评估了在胰凝乳蛋白酶存在下ES-PU的降解情况。结论是,ES-PU垫具有在软组织工程应用中使用的潜力。因此,这项研究的下一步是研究ES-PU垫支持心脏细胞和直接组织发生的能力。从未成熟的心室中分离的细胞在带有对齐或未对齐微纤维的ES-PU垫上生长。 ES-PU培养物包含电耦合的收缩性心肌细胞,并且表明纤维方向影响多细胞组织。与在各向同性ES-PU或TCPS对照上生长的细胞相比,在对齐的支架上生长的细胞的心钠素表达(ANP)明显更低,表明支架施加的比对导致更成熟的细胞表型。因此,可以得出结论,ES-PU超细纤维的物理组织在体外影响多细胞形式和心脏细胞功能。

著录项

  • 作者

    Rockwood, Danielle N.;

  • 作者单位

    University of Delaware.$bDepartment of Materials Science and Engineering.;

  • 授予单位 University of Delaware.$bDepartment of Materials Science and Engineering.;
  • 学科 Engineering Biomedical.; Engineering Materials Science.
  • 学位 Ph.D.
  • 年度 2007
  • 页码 155 p.
  • 总页数 155
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 生物医学工程;工程材料学;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号