首页> 外文学位 >Advancing microarrays with acoustic dispensing technology and probing the kinome.
【24h】

Advancing microarrays with acoustic dispensing technology and probing the kinome.

机译:借助声波分配技术推动微阵列技术发展并探寻动因。

获取原文
获取原文并翻译 | 示例

摘要

We have developed a novel microarray platform for constructing enzyme bioassays. Utilizing acoustic dispensing technology, reactions were assembled on glass slides in a no-contact manner without cross-contamination, surface linkages, or wash steps. The method handles nanoliter reactions in the liquid phase (glycerol in the buffer and incubating under humidity minimized evaporation) with coefficients of variation under 10%, is compatible with radiolabel, fluorescence, or surface binding assays, and is suitable for enzyme-substrate, high-throughput, or compound library screening. Using proviral integration site-1 (Pim1) kinase, a three-point dose response at 0.75 muM, 1.5 muM, and 3 muM with a known Pim1 inhibitor (hb1217) and radiolabeled ATP showed the feasibility of multicomponent microarray assembly through acoustic dispensing as Pim1 was increasingly inhibited. In the detection step, the arrays were blotted to phosphocellulose membranes to capture the phosphorylated substrate, and phosphor imaging was used to quantify the washed membranes. Signal-to-background ratios were as high as 165 and average CVs were ∼20%. CVs from dispensing typical working buffers were ∼5%. While most microarray approaches use solid pins for contact spotting, acoustic dispensing avoids the drawbacks of undesired physical contact with biological samples, difficulties in assembling multicomponent reactions, rigid modes of printing operation that lacks flexibility, and time-consuming wash steps. We demonstrated the utility of acoustic dispensing over pins by delivering cathepsin L in a spot-on-spot fashion into individual 50 nL nanodroplets to rapidly activate reactions, generating variable volume spots from 2 to 50 nL with less spot size variations, and linearly dispensing suspensions of fluorescent beads from source wells containing 0.1 to 10 x 108 beads/mL. Acoustic dispensing meets the needs associated with spatially-addressed assembly of multicomponent enzyme reactions on a nanoliter scale, especially the need to re-address a previously spotted position. Finally, we have screened a series of ruthenium organometallic compounds whose structures are based on the indolocarbazole scaffold of staurosporine, a natural kinase inhibitor. Based on the information derived from profiling a library of 58 such compounds against a panel of 50 kinases, a series of structure activity relationship studies were performed, resulting in the development of selective, nanomolar inhibitors for TrkA and Pim1 kinase.
机译:我们已经开发出一种用于构建酶生物测定的新型微阵列平台。利用声学分配技术,反应以无接触方式组装在载玻片上,而没有交叉污染,表面连接或洗涤步骤。该方法可处理液相中的纳升反应(缓冲液中的甘油,并在湿度最小化的条件下孵育),变异系数低于10%,与放射性标记,荧光或表面结合测定兼容,适用于高酶切底物-通量或化合物库筛选。使用前病毒整合位点1(Pim1)激酶,0.75μM,1.5μM和3μM的三点剂量反应,使用已知的Pim1抑制剂(hb1217)和放射性标记的ATP,证明了通过声学分配作为Pim1进行多组分微阵列组装的可行性被越来越抑制。在检测步骤中,将阵列印迹到磷酸纤维素膜上以捕获磷酸化的底物,然后使用磷光体成像对清洗过的膜进行定量。信噪比高达165,平均CV约为20%。分配典型工作缓冲液的CV约为5%。尽管大多数微阵列方法都使用实心针进行接触点定位,但声点分配可避免与生物样品发生不必要的物理接触,组装多组分反应困难,缺乏灵活性的刚性印刷操作方式以及耗时的洗涤步骤等缺点。我们通过将组织蛋白酶L以点对点的方式递送到单独的50 nL纳米液滴中以快速激活反应,产生2至50 nL的可变体积斑点,斑点大小变化较小,并线性分配悬浮液,证明了通过针头进行声学分配的实用性来自源孔的荧光珠的浓度为0.1至10 x 108珠/ mL。声学分配满足与以纳升为单位的多组分酶反应的空间寻址组装相关的需求,尤其是重新寻址先前发现的位置的需求。最后,我们筛选了一系列钌有机金属化合物,其结构基于天然激酶抑制剂星形孢菌素的吲哚并咔唑骨架。根据将58种此类化合物的文库针对一组50种激酶进行分析所获得的信息,进行了一系列结构活性关系研究,从而开发了针对TrkA和Pim1激酶的选择性纳摩尔抑制剂。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号