Monotonic and Fatigue Behavior of Mg Alloy Friction Stir Spot Welds: An International Benchmark Test in the 'Magnesium Front End Research and Development' Project

摘要

This paper presents the experimental results of benchmark coupon testing of monotonic and cyclic conditions on friction stir spot welded coupons of Mg AZ31alloy. The results presented here are a product of a collaborative multinational research effort involving research teams from Canada, China, and the United States. Fatigue tests were conducted in load control at R=0.1 at two different maximum loads: lkN and 3kN. Good agreement was found between the participating labs regarding the number of cycles to failure. Differences in the failure modes were observed for the two different loading conditions tested. At the higher load, fatigue failure was caused by interfacial fracture. However, at the lower load, fatigue cracks formed perpendicular to the loading direction, which led to full width separation. For additional comparison, the monotonic and cyclic results of the friction stir spot welds are compared to resistance spot welded coupons of similar nugget size.