首页> 外文会议>Specialty optical fibers and their applications >Er-Yb double-clad cw tunable fiber laser
【24h】

Er-Yb double-clad cw tunable fiber laser

机译:Er-Yb双包层连续可调光纤激光器

获取原文
获取原文并翻译 | 示例

摘要

In this work we experimentally demonstrated a wavelength-tunable fiber laser by the use of a Er:Yb double-clad fiber placed in a Fabry-Perot cavity formed by two Dichroic Mirrors (DM). We used a 976 nm wavelength pump laser. The maximal output power from this laser that we can introduce to the fiber was 20 W. We used a Diffractive Grating (DG) with 600 1/mm in our laser cavity to get wavelength tunability. The zero order reflection from the DG is the output coupler and the first order diffracted beam is reflected back into the fiber using a DM. With this configuration we can tune the wavelength from 1535 to 1567 nm by rotating a DM at a rate of 0.02 degreesm. With our configuration wide tunability was possible only when we used fiber lengths between 2.5 and 3.6 m. The maximal output power was 850 mW using 3.6 m of fiber length. We believe that a Q-switched extension of this source can be used in nonlinear optics applications, such as Terahertz generation.
机译:在这项工作中,我们通过使用Er:Yb双包层光纤放置在由两个二向色镜(DM)形成的Fabry-Perot腔中,通过实验演示了波长可调光纤激光器。我们使用了976 nm波长的泵浦激光器。我们可以引入光纤的该激光器的最大输出功率为20W。我们在激光腔中使用600 1 / mm的衍射光栅(DG),以获得波长可调性。来自DG的零级反射是输出耦合器,并且使用DM将一阶衍射光束反射回光纤。通过这种配置,我们可以通过以0.02度/ nm的速率旋转DM来将波长从1535调整为1567 nm。通过我们的配置,仅当使用2.5至3.6 m的光纤长度时,才可能实现宽可调性。使用3.6 m的光纤长度,最大输出功率为850 mW。我们相信,这种源的Q开关扩展可用于非线性光学应用,例如太赫兹波的产生。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号