A NEW PRESSURIZABLE DDLATOMETER FOR MEASURING BULK MODULUS OF THERMOSETS

机译：一种新型的可测量温度的散装模量测压计

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

A new pressurizable dilatometer has been developed to measure the time-dependent bulk modulus of thermosets during cure. The bulk modulus is important because its magnitude is directly related to isotropic residual stress development in curing thermoset-reinforced composites. The instrument is described and initial calibration runs are shown.

机译：已经开发出一种新的可加压膨胀仪，以测量固化期间热固性材料的时间依赖性体积模量。体积模量很重要，因为它的大小直接与固化热固性增强复合材料时的各向同性残余应力发展有关。描述了仪器并显示了初始校准运行。

著录项

来源
《Society of Plastics Engineers Annual Technical Conference 2005(ANTEC 2005) vol.8; 20050501-05; Boston,MA(US)》|2005年|P.335-339|共5页
会议地点 BostonMA(US)
作者
Yan Meng; Paul OConnell; Gregory B. McKenna; Sindee L. Simon;
展开▼
作者单位

Department of Chemical Engineering, Texas Tech University Lubbock, TX 79409-3121;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类合成树脂与塑料工业;
关键词
dilatometry; pressurizable dilatometer; bulk modulus; time-dependent; thermosets;

机译：膨胀计;可加压膨胀计;体积模量;时变;热定律;

相似文献

外文文献
中文文献
专利

1. Characterization of the cure shrinkage, reaction kinetics, bulk modulus and thermal conductivity of thermoset resin from a single experiment [J] . Nawab Y., Casari P., Boyard N., Journal of Materials Science . 2013,第6期

机译：通过一次实验表征热固性树脂的固化收缩率，反应动力学，体积模量和热导率
2. Dynamic pressurization method for measuring permeability and modulus: II. cementitious materials [J] . Zachary C. Grasley, George W. Scherer, David A. Lange, Materials and structures . 2007,第7期

机译：用于测量渗透率和模量的动态加压方法：II。胶结材料
3. Dynamic pressurization method for measuring permeability and modulus: I. theory [J] . George W. Scherer Materials and structures . 2006,第10期

机译：用于测量渗透率和模量的动态加压方法：I。理论
4. A NEW PRESSURIZABLE DDLATOMETER FOR MEASURING BULK MODULUS OF THERMOSETS [C] . Yan Meng, Paul OConnell, Gregory B. McKenna, Society of Plastics Engineers Annual Technical Conference . 2005

机译：一种用于测量热固性块体积模量的新型可压的曲线测量表
5. METHOD OF MEASURING THE BULK MODULUS LOSS FACTOR OF SMALL SOLID SPECIMENSAT FREQUENCIES BETWEEN 0.5 AND 20 KC. [D] . SIMON, MURRAY MELVIN. 1965

机译：测量0.5 KC和20 KC之间的小固体试样的本体模量损失因子的方法。
6. Electronically driven collapse of the bulk modulus in δ-plutonium [O] . Neil Harrison 2020

机译：电子驱动的δmodulus中的体积模量崩溃
7. Characterization of the cure shrinkage, reaction kinetics, bulk modulus and thermal conductivity of thermoset resin from a single experiment [O] . Nawab, Yasir, Casari, Pascal, Boyard, Nicolas, 2013

机译：一次实验即可表征热固性树脂的固化收缩率，反应动力学，体积模量和热导率

A NEW PRESSURIZABLE DDLATOMETER FOR MEASURING BULK MODULUS OF THERMOSETS

摘要

著录项

相似文献

相关主题

期刊订阅