Fiber laser sensor using the intermodal beating frequency to interrogate fiber Bragg gratings.

摘要

We discuss a fiber Bragg grating laser sensor in which the measurement of an intermodal beating frequency is used forthe Bragg gratings (BG) interrogation. The linear cavity of the laser is formed by one reference BG at one side and oneor several sensing BGs at the opposite side of the cavity. For this report we used two sensing BGs. In the laser with oneBG at each cavity side the beating frequency is defined by the distance between BGs. If two sensing BGs are used, thebeating frequency is defined by both the distances between the reference BG and each of the sensing BGs and by a ratiobetween sensing BGs reflections at the laser wavelength. So, when the reflection of sensing BGs is shifted bytemperature or strain, the beating frequency is changed. We discuss the experimental results obtained for the laser sensorwith the total cavity length equal to 4277 m; the distance between the sensing BGs was 47 m. A RF spectrum analyzerwith 100-kHz bandwidth was used that allows the measurement of three first harmonics. We found that the beatingfrequency can be moved from the value corresponding to the 4277-m cavity to the value corresponding to the 4230-mcavity by shifting the maximum reflection of the sensing BGs. The narrowest spectrum equal to 52 Hz was obtainedwhen the tuned delay was incorporated into the cavity. A shift of the maximum BG reflection less then 0.05 nm wasdetected.