首页> 外文会议>Silicon photonics and photonic integrated circuits II >Electrically driven hybrid Si/III-V lasers based on adiabatic mode transformers
【24h】

Electrically driven hybrid Si/III-V lasers based on adiabatic mode transformers

机译:基于绝热模式变压器的电驱动混合Si / III-V激光器

获取原文
获取原文并翻译 | 示例

摘要

We report the first Silicon/III-V evanescent laser based on adiabatic mode transformers. The hybrid structure is formed by two vertically superimposed waveguides separated by a 100nm-thick SiO_2 layer. The top waveguide, fabricated in an InP/InGaAsP-based heterostructure, serves to provide optical gain, and the bottom Si-waveguides system, which supports all optical functions, is constituted by two tapered rib-waveguides (mode transformers), two distributed Bragg reflectors (DBR), and a surface-grating coupler. The supermode of this hybrid structure is controlled by an appropriate design of the tapers located at the edges of the gain region. In the middle part of the devices, almost all the field resides in the III-V waveguide so that the optical mode experiences maximal gain, while in regions near the III-V facets, mode transformers ensure an efficient transfer of the power flow towards Si-waveguides. The investigated device operates under quasi-continuous wave regime. The room temperature threshold current is 100 mA, the side mode suppression ratio is as high as 20dB, and the fiber-coupled output power is ~7mW.
机译:我们报告了第一台基于绝热模式变压器的Silicon / III-V van逝激光。混合结构由两个垂直重叠的波导形成,两个波导被100nm厚的SiO_2层隔开。顶部波导以基于InP / InGaAsP的异质结构制成,用于提供光学增益,而底部的支持所有光学功能的Si波导系统由两个锥形肋式波导(模式变压器),两个分布式Bragg构成反射器(DBR)和表面光栅耦合器。这种混合结构的超模由位于增益区边缘的锥度的适当设计控制。在设备的中间部分,几乎所有场都位于III-V波导中,因此光学模式会获得最大增益,而在III-V刻面附近的区域中,模式转换器可确保将功率流有效地传输到Si -波导。被研究的设备在准连续波状态下运行。室温阈值电流为100 mA,侧模抑制比高达20dB,光纤耦合输出功率为〜7mW。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号