Development of Ultra-fine Grain Steel with Good Comprehensive Properties in BX Steel

机译：BX钢综合性能优良的超细晶粒钢的研制

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

The ultra-fine grain steels named as CX400 and CX500 were obtained in BX Steel by optimizing the composition and hot rolling process parameters of Q235 etc. The yield strength of CX400 reaches 470MPa, the yield strength of CX500 reaches 530MPa, their average grain size is 3μm to 4μm with good comprehensive properties.

机译：通过优化Q235等的成分和热轧工艺参数，在BX Steel中获得了名为CX400和CX500的超细晶粒钢。CX400的屈服强度达到470MPa，CX500的屈服强度达到530MPa，平均晶粒尺寸为。 3μm至4μm，具有良好的综合性能。

著录项

来源
《Proceedings of the World Engineers' Convention 2004 vol G: Ecological Material and Green Manufacturing》|2004年|P.27-30|共4页
会议地点 Shanghai(CN)
作者
Jin Yuegui; Du Linxiu;
展开▼
作者单位

Benxi Iron Steel Company Benxi 117000 China;

展开▼
会议组织
原文格式 PDF
正文语种
中图分类
关键词
ultra-fine grain steel; deformation induced transformation; process parameters;

机译：超细晶粒钢变形引起的变形；工艺参数;

相似文献

外文文献
中文文献
专利

1. Characteristics of the heat-affected zone in ultra-fine grained steel during ultra-narrow gap GMA welding Softening zone and microstructures of the heat-affected zone in ultra-fine grained steel [J] . R. ITO, K. HIRAOKA, C. SHIGA Welding Research Abroad . 2006,第2期

机译：超窄间隙GMA焊接过程中超细晶粒钢的热影响区特性超细晶粒钢的软化区和热影响区的组织
2. Characteristics of the heat-affected zone in ultra-fine grained steel during ultra-narrow gap GMA welding. Softening zone and microstructures of the heat-affected zone in ultra-fine grained steel [J] . R ITO, K HIRAOKA, C SHIGA Welding International . 2005,第6期

机译：超细间隙GMA焊接中超细晶粒钢的热影响区特征。超细晶粒钢的软化区和热影响区的组织
3. A comprehensive study of microstructure development and its corresponding tensile properties in nano/ultrafine-grained metastable austenitic steel during accumulative roll bonding (ARB) [J] . H.R. Jafarian, S.H. Mousavi Anijdan, A.R. Eivani, Materials Science and Engineering . 2017,第auga4期

机译：纳米/超细亚稳奥氏体不锈钢在累积辊压结合过程中的微观组织发展及其相应的拉伸性能的综合研究
4. Development of Ultra-fine Grain Steel with Good Comprehensive Properties in BX Steel [C] . WANG Zhongdong, JIN Yuegui, GAO Cairu, International Conference on Advanced Structural Steels(ICASS 2004) vol.1; 20040414-16; Shanghai(CN) . 2004

机译：BX钢综合性能优良的超细晶粒钢的研制
5. Effect of Neutron Irradiation on Mechanical Behavior of Ultra-Fine Grained Low Carbon Steel – Application to Next Generation Fission Reactors [D] . Alsabbagh, Ahmad Hesham Hasan 2014

机译：中子辐照对超细晶粒低碳钢力学行为的影响–在下一代裂变反应堆中的应用
6. Influence of Prior Martensite on Bainite Transformation Microstructures and Mechanical Properties in Ultra-Fine Bainitic Steel [O] . Hui Guo, Xianying Feng, Aimin Zhao, 2019

机译：马氏体对超细贝氏体钢中贝氏体相变组织和力学性能的影响
7. Structure-properties relationship of ultra-fine grained V-microalloyed dual phase steels [O] . Babak Shalchi Amirkhiz, Colin Scott, Fateh Fazeli 2018

机译：超细颗粒V微合金双相钢的结构性质关系
8. THE WELD HEAT-AFFECTED ZONE NOTCH-IMPACT PROPERTIES OF A SEMI-KILLED C - Mn STEEL AND A FULLY KILLED ALUMINIUM GRAIN-REFINED C-Mn STEEL [R] . E. Smith 1970

机译：受半自燃的C - mn钢和全杀铝的C - mn钢焊接受热影响区的缺口冲击性能

Development of Ultra-fine Grain Steel with Good Comprehensive Properties in BX Steel

摘要

著录项

相似文献

相关主题

期刊订阅