【24h】

Acousto-Optically Tunable Laser

机译:声光可调激光器

获取原文
获取原文并翻译 | 示例

摘要

Acousto-optical tuning has been implemented for an α-Al_2O_3: Ti~(3+) laser pumped by a 30 W Cu-vapor laser, which is a generator-amplifier system operating at 15,625 Hz, with a pulse duration of 50 nsec. The system can select an arbitrary laser wavelength in the IR range for approximately 64 usec. Experimentally the transformed IR beam has been varied in the visible and UV range. Recently, fempto-second tunable lasers have been used for fast-process spectroscopy. A Ti-doped sapphire crystal is used as an active element in such lasers. It generates optical beams in a range of 0.6… 1 μm. Usually, the second harmonic of a neodymium yttrium-aluminum garnet laser is used to pump the laser. The main generation line is 1.064 μm. The optical beam wavelength is usually tuned using a dispersive element, like a prism or grid, mechanically tuning it to the necessary wavelength. We propose to replace the prism with an acousto-optic filter for tuning. The time needed to change wavelengths is approximately 64 μsec, several thousand times faster than mechanical methods.
机译:已经对由30 W Cu蒸气激光器泵浦的α-Al_2O_3:Ti〜(3+)激光器进行了声光调谐,该激光器是工作在15,625 Hz的发生器-放大器系统,脉冲持续时间为50 ns。系统可以选择IR范围内的任意激光波长约64微秒。实验上,转换后的红外光束在可见光和紫外线范围内有所变化。近来,飞秒可调激光器已经用于快速过程光谱学。掺钛的蓝宝石晶体用作这种激光器中的有源元件。它会产生0.6…1μm范围内的光束。通常,钕钇铝石榴石激光器的二次谐波用于泵浦激光器。主要的生产线是1.064μm。通常使用诸如棱镜或栅格之类的色散元件来调谐光束波长,从而将其机械地调谐到所需的波长。我们建议用声光滤镜代替棱镜进行调谐。改变波长所需的时间约为64微秒,比机械方法快数千倍。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号