首页> 外文会议>Optical modelling and design IV >Application of input amplitude masks in image encryption with spatially incoherent illumination for increase of decrypted images signal-to-noise ratio
【24h】

Application of input amplitude masks in image encryption with spatially incoherent illumination for increase of decrypted images signal-to-noise ratio

机译:输入幅度掩码在空间不相干照明的图像加密中的应用,以提高解密图像的信噪比

获取原文
获取原文并翻译 | 示例

摘要

The majority of existing methods of optical encryption use not only light intensity distribution, easily registered with photosensors, but also its phase distribution. This provides best encryption strength for fixed quantities of elements and phase levels in a mask. Downsides are holographic registration scheme used in order to register not only light intensity distribution but also its phase distribution and speckle noise occurring due to coherent illumination. That factors lead to very poor decryption quality when it comes from computer simulations to optical implementations. Method of optical encryption with spatially incoherent illumination does not have drawbacks inherent to coherent systems, however, as only light intensity distribution is considered, mean value of image to be encrypted is always above zero which leads to intensive zero spatial frequency peak in image spectrum. Therefore, in case of spatially incoherent illumination, image spectrum, as well as encryption key spectrum, cannot be white. If encryption is based on convolution operation, no matter coherent light used or not, Fourier spectrum amplitude distribution of encryption key should overlap Fourier spectrum amplitude distribution of image to be encrypted otherwise loss of information is unavoidable. Another factor affecting decrypted image quality is original image spectrum. Usually, most part of image energy is concentrated in area of low frequencies. Consequently, only this area in encrypted image contains information about original image, while other areas contain only noise. We propose to use additional encoding of input scene to increase size of the area containing useful information. This provides increase of signal-to-noise ratio in encrypted image and consequentially increases quality of decrypted images. Results of computer simulations of test images optical encryption with spatially incoherent illumination and additional input amplitude masks are presented.
机译:现有的大多数光学加密方法不仅使用易于在光电传感器中记录的光强度分布,而且还使用其相位分布。这为掩模中固定数量的元素和相位级别提供了最佳的加密强度。缺点是使用了全息配准方案,以便不仅配准光强度分布,还配准由于相干照明而产生的相位分布和斑点噪声。从计算机仿真到光学实现,这些因素导致解密质量非常差。具有空间非相干照明的光学加密方法没有相干系统固有的缺点,但是,由于仅考虑了光强度分布,因此要加密的图像的平均值始终高于零,这会导致图像频谱中出现密集的零空间频率峰值。因此,在空间不连续照明的情况下,图像光谱以及加密密钥光谱不能为白色。如果基于卷积运算进行加密,则无论是否使用相干光,加密密钥的傅立叶光谱幅度分布都应与要加密的图像的傅立叶光谱幅度分布重叠,否则信息丢失是不可避免的。影响解密图像质量的另一个因素是原始图像频谱。通常,图像能量的大部分集中在低频区域。因此,加密图像中仅此区域包含有关原始图像的信息,而其他区域仅包含噪声。我们建议使用输入场景的附加编码来增加包含有用信息的区域的大小。这增加了加密图像中的信噪比,从而提高了解密图像的质量。呈现了计算机模拟的测试图像的光学模拟,其中具有空间不相干的照明和附加的输入幅度掩码。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号