Optical Glasses and Optical Elements - Comparison of Specification Standards ISO DIS 12123 and ISO 10110

摘要

Drawings of optical elements contain specification requirements on the properties of optical glass in most cases according to the standard ISO 10110 part 2 stress birefringence, part 3 bubbles and inclusions and part 4 inhomogeneity and striae1. When ordering glass for the production of the elements sometimes uncertainties and misunderstandings occur, since the specification requirements on elements according to ISO 10110 cannot be transferred to the raw glass easily and clearly in any case. The reason is that raw glass may be delivered in very different shape: From close to net shape as pressings to far away from that as strip or block glass. Additionally in many cases an individual inspection by the glass supplier is not possible due to cost reasons or since it is not known at the time of delivery, which elements will be produced from the glass piece.rnUp to now an international standard was missing for optical raw glass. This standard ISO DIS 12123 is now close to final voting and release. This presentation provides the motivation for writing the standard, a comparison with ISO 10110 and information on the state and progress of standardization of optical glass.