首页> 外文会议>Nonlinear Optical Phenomena and Applications >All-solid-state Quasi-continuous-wave Tunable Ti: Sapphire Laser and Pump-tuning PPLN-OPO
【24h】

All-solid-state Quasi-continuous-wave Tunable Ti: Sapphire Laser and Pump-tuning PPLN-OPO

机译:全固态准连续波可调谐钛:蓝宝石激光器和泵浦调谐PPLN-OPO

获取原文
获取原文并翻译 | 示例

摘要

In this paper, high power and high efficiency operation of an all solid state, quasi-continuous-wave, Ti: sapphire laser is obtained with a laser diode pumped frequency doubled Nd: YAG laser. Discussing the output characters with three kinds of oscillate cavity, we acquire high output power, high light quality Ti: sapphire laser with flat to flat oscillate cavity. The maximum output power is 6.1W at 797nm with pump power of 27W, conversion efficiency is 22.6%, FWHM is 38.4ns and M~2 is 3.6. Tuning by birefringent filter, all solid state titanium doped sapphire laser's output wavelength is from 750~950nm and average output power is 4.7W. Pump-tuning method is very important and useful to OPO because it can relieve the OPO of any requirement for crystal translation or temperature variation. In this way, using PPLN crystal with poled period of 20.5μm, 1017~ 3384nm quasi-continuous-wave output is obtained pumped by Ti: sapphire laser which is tuned from 770 to 820nm. The maximum output power is 1.9W at 1208nm and conversion efficiency is 32%.OPO's average output power is 1.3W in whole output wavelength.
机译:在本文中,使用激光泵浦倍频Nd:YAG激光器获得了全固态准连续波Ti:蓝宝石激光器的高功率和高效率操作。讨论了三种振荡腔的输出特性,我们获得了高输出功率,高光质量的钛:蓝宝石激光器,具有平坦到平坦的振荡腔。 797nm处的最大输出功率为6.1W,泵浦功率为27W,转换效率为22.6%,FWHM为38.4ns,M〜2为3.6。通过双折射滤光片调谐,全固态钛掺杂蓝宝石激光器的输出波长为750〜950nm,平均输出功率为4.7W。泵浦调谐方法对于OPO非常重要且有用,因为它可以减轻OPO对晶体平移或温度变化的任何要求。这样,使用极化周期为20.5μm的PPLN晶体,通过Ti:蓝宝石激光器将其从770nm调谐到820nm,可获得1017〜3384nm的准连续波输出。在1208nm处,最大输出功率为1.9W,转换效率为32%.OPO在整个输出波长下的平均输出功率为1.3W。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号