Self-aligned assembly of microlens arrays with micromirrors

摘要

Abstract: Lenslet integrated Micro-Electro-Mechanical Deformable Micromirrors (LMEM-DMs) are electrostatic micromirror arrays fabricated through a commercial surface micromachining process and integrated with polymer or glass microlenses. The electronics resins (Photo-BCB) which are photo-sensitive polymers were used to fabricate polymer microlens arrays. A 4 $MUL 4 element photo-BCB Cyclotene microlens array was fabricated on a thin quartz substrate. Self-aligned soldering flip-chip assembly is applied to integrate microlens arrays directly over the micromirrors. The lens/mirror gap is controlled using the final height of solder balls, and the lateral alignment is achieved by the solder self-aligning mechanism. The LMEM-DM is attractive due to its low cost and the low drive voltages. The use of a lenslet to focus the incoming laser beam onto the reflective surface of a micromirror substantially increases overall optical fill factor of the micromirror array. The LMEM-DM provides superior aberration correction with low residual diffraction effects. For mirror deflections much smaller than the lenslet focal length, the LMEM-DM behaves as a phase-only modulating optical element. The LMEM-DM thus serves as a rugged, compact optical element for beam steering, beam shaping, and aberration correction applications. !8