首页> 外文会议>GSAM 2012;International Conference on Intelligent System and Applied Material >Preparation of Cationic Polyacrylamide-Grafted Starch Flocculant and Its Application in the Treatment of Coal Slurry Wastewater
【24h】

Preparation of Cationic Polyacrylamide-Grafted Starch Flocculant and Its Application in the Treatment of Coal Slurry Wastewater

机译:阳离子聚丙烯酰胺接枝淀粉絮凝剂的制备及其在煤浆废水处理中的应用

获取原文

摘要

A cationic polyacrylamide-grafted starch (St-g-CPAM) flocculant for the coal slurry wastewater, was prepared by using corn starch and acrylamide (AM) as monomers, ethylene methyl propenoyl trimethylammonium chloride (DMC) as cationic monomer through solution polymerization. The effects of initiator concentration, reaction temperature, and monomer concentration on percentage of grafting and the grafting efficiency were investigated. The results show that the optimal conditions of the polymerization are as follows: the monomer to substrate ratio of 2.5, AM:DMC ratio of 2:1, potassium persulfate of 3×10~-3mol/L, reaction time of 4h, the reaction temperature of 50°C. The additional dosage of St-g-CPAM is varying between 20 and 30 mg/L to obtain good flocculation capability
机译:通过使用玉米淀粉和丙烯酰胺(AM)作为单体,通过溶液聚合作为单体,通过溶液聚合作为阳离子单体来制备用于煤浆料废水的阳离子聚丙烯酰胺覆盆子絮凝剂的煤浆料废水的絮凝剂。 研究了引发剂浓度,反应温度和单体浓度对接枝百分比和移植效率的影响。 结果表明,聚合的最佳条件如下:基板比的单体为2.5,AM:DMC比为2:1,钾过硫酸钾,3×10〜3mol / L,反应时间为4h,反应 温度为50°C。 ST-G-CPAM的额外剂量在20至30mg / L之间变化,以获得良好的絮凝能力

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号