Low-Frequency Sine Webs for Improved Shear Buckling Performance of Plate Girders

摘要

Steel plate girders are used extensively in buildings and bridges. Given shear rarely governs, minimizing web thickness is desirable. However, web slenderness can enable shear buckling and fatigue problems. The traditional strategy is to use welded transverse stiffeners; yet transversely-stiffened girders are prone to fatigue cracks and difficult to fabricate at high slenderness ratios. Thus, AASHTO currently limits web slenderness to 150. Alternatively, corrugated web girders overcome these deficiencies but require robotic welding for the web-to-flange weld. Corrugated webs are also limited to small web thicknesses (6mm or less) and girder depths (less than 1.5m) given web forming limits. The authors propose an alternative web geometry, introducing low-frequency sinusoids (LFS) in the web along its length. The LFS web can be welded to the flanges using semi-automatic weld techniques currently employed by bridge fabricators. The reduced web curvature allows for a wider array of web forming techniques with much larger plate thicknesses. In a finite element study, web geometric properties such as sinusoidal frequency and amplitude are varied. Results demonstrate a significant increase in the elastic shear buckling load and ultimate strength using a wavelength equal to the depth of the girder. The results of this study show promise for improved girder durability paired with material efficiency, demonstrating that a web product with constant amplitude and wavelength could work for various girder depths up to 3m and above.