首页> 外文会议>IEEE Far East NDT New Technology amp;amp;amp;amp;amp;amp; Application Forum >Investigation of Remote Field Eddy Current Defect Detection for Pipeline Welds
【24h】

Investigation of Remote Field Eddy Current Defect Detection for Pipeline Welds

机译:管道焊缝远程场涡流缺陷检测研究

获取原文

摘要

Due to the roughness and the geometry of the weld region on the pipeline, the defects detection remains as a challenge task by using Nondestructive Testing (NDT) techniques. Remote field eddy current testing (RFECT) has been applied for the detection of the deeper hidden cracks due to its significant penetrate ability. This paper investigates the feasibility study for deeper weld defects detection by using RFECT. In particular, optimizing parameters such as phase rotation and noise reduction have been conducted to enhance the detectability. The impact factor of lift-off is studied to balance the uniformity and intensity of the eddy current distribution. The results have been validated for girth weld defects detection with an extreme deep depth at 9.0 mm of the X70 Pipeline with large lift-off distance at 4.7 mm.
机译:由于管道上的焊接区域的粗糙度和几何形状,缺陷检测通过使用非破坏性测试(NDT)技术仍然是挑战任务。远程现场涡流测试(RFECT)已被应用于检测由于其显着的渗透能力,检测更深的隐藏裂缝。本文调查了使用RFECT进行更深焊缝缺陷检测的可行性研究。特别地,已经进行了优化诸如相位旋转和降噪的参数以增强可检测性。研究了剥离的影响因子,以平衡涡流分布的均匀性和强度。结果已被验证,对于X70流水线的9.0毫米处的极端深度深度,在X70流水线的9.0毫米处具有较大的升降距离为4.7毫米。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号