首页> 外文会议>International Conference on Applied Physics and Material Applications >Fabrication and I-V characterization with monochromatic light of multilayer poly(3-hexylthiophene)-CNT/C60 thin films on ITO glass substrate
【24h】

Fabrication and I-V characterization with monochromatic light of multilayer poly(3-hexylthiophene)-CNT/C60 thin films on ITO glass substrate

机译:用ITO玻璃基板上的多层聚(3-己基噻吩)-CNT / C60薄膜的单色光进行制备和I-V表征

获取原文

摘要

Multilayer poly(3-hexylthiophene)-CNT/C60 thin films on ITO glass substrate was fabricated regarding to the function of each layer. Poly(3-hexylthiophene) (P3HT) is used as a donor layer and fullerene (C60) is used as an acceptor layer of the device. The carbon-nanotube (CNT) is homogeneously mixed in the donor layer to increase charge transportability. The structures of poly(3-hexylthiophene), poly(3-hexylthiophene)-CNT were fabricated in comparison of poly(3-hexylthiophene)-CNT/C60 thin films. The P3HT-CNT bulk heterojunction was deposited on ITO glass substrate by spin coating technique and then the C60 thin film was deposited on the P3HT by thermal evaporating technique. The I-V characteristic of ITO/P3HT-CNT/Al and ITO/P3HT-CNT/C60/Al were investigated in the monochromatic light. The result showed that the ITO/P3HT-CNT/Al structures respond with red and green light, and the ITO/P3HT-CNT/C60/Al structure responds with blue light. The UV absorption was measured and the result was consistence with the I-V characterization.
机译:多层聚(3-己基噻吩)-CNT / C60薄膜在ITO玻璃基板上进行了关于各层的功能。聚(3-己基噻吩)(P3HT)用作供体层,富勒烯(C60)用作该装置的受体层。碳 - 纳米管(CNT)在供体层中均匀地混合以增加电荷可移性。与聚(3-己基噻吩)-CNT / C60薄膜相比,制造聚(3-己烯烯烯),聚(3-己烯酮)-CNT的结构。通过旋涂技术在ITO玻璃基板上沉积P3HT-CNT散装异质结,然后通过热蒸发技术在P3HT上沉积C60薄膜。在单色光中研究了ITO / P3HT-CNT / Al和ITO / P3HT-CNT / C60 / Al的I-V特征。结果表明,ITO / P3HT-CNT / Al结构用红色和绿光响应,ITO / P3HT-CNT / C60 / Al结构用蓝光进行响应。测量UV吸收,结果与I-V表征一致。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号