首页> 外文会议>Conference on fiber lasers XII >Bidirectional single-longitudinal mode SOA-fiber ring laser based on optical filter-assisted gain starvation
【24h】

Bidirectional single-longitudinal mode SOA-fiber ring laser based on optical filter-assisted gain starvation

机译:基于光学滤波器辅助增益饥饿的双向单纵向模式SOA光环激光

获取原文

摘要

Generation of a single-longitudinal mode (SLM) in bidirectional ring lasers has direct impact on the laser linewidth and dynamic range of operation, when used in rotation sensing applications. Besides, operating at a specific wavelength helps in optimizing the performance of the system components. In this work, we report a novel method for generating SLM in bidirectional SOA-fiber ring laser using mechanically-tunable Fabry-Perot filter with 1-nm bandwidth. The method is based on gain starvation by tuning the central wavelength of the filter in the blue edge of the gain-wavelength response. By adjusting the SOA driving current, the oscillation condition is satisfied mainly for single mode and bidirectional operation can be achieved simultaneously. The SLM operation is verified by monitoring the beating signal between the modes on an RF spectrum analyzer. Using an SOA with a small-signal gain of 20 dB at 300 mA pumping current and a gain bandwidth of 100 nm centered around 1490 nm; the central wavelength of the ring laser could be tuned from 1440 nm to 1480 nm with a side-mode suppression ratio of 25 dB.
机译:在双向环形激光器中产生单纵模(SLM)对旋转感应应用中使用时对激光线宽和动态操作范围直接影响。此外,在特定波长下操作有助于优化系统组件的性能。在这项工作中,我们通过用1-nm带宽使用机械可调谐的法布里 - 珀罗滤光片报告了一种新的用于在双向SOA光环激光器中产生SLM的方法。该方法通过在增益波长响应的蓝色边缘中调谐滤波器的中心波长来基于增益饥饿。通过调整SOA驱动电流,主要用于单模的振荡条件,并且可以同时实现双向操作。通过监视RF频谱分析仪上的模式之间的跳动信号来验证SLM操作。在300 mA泵送电流下使用具有20 dB的小信号增益的SOA,并且在1490nm左右以100nm的增益带宽为中心;环形激光器的中心波长可以从1440nm至1480nm调谐,侧面抑制比为25dB。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号